On Wed, 27 May 2020 at 11:30, Ben Greear [off-list ref] wrote:

While doing a torture test on OpenWrt using ath10k-ct drivers/firmware, the 5Ghz AP fell off the
air.  After debugging, I found this in the console logs.

I am guessing that the only way to recover in this case would be to reboot, but in case someone else
has ideas on additional ways to kick the 4019 chip to have it start responding again, please let me know.

Hm, i haven't looked at the Dakota datasheet in a while; does the
platform support or ath10k actually power off/on the core fully, or
just the RTC/MAC/PHY path?

Chances are there's a reset controller somewhere that lets you put the
bus and tensilia cores in reset..



-adrian