[PATCH] brcmfmac: fix wrong location to get firmware feature
From: Jaehoon Chung <jh80.chung@samsung.com>
Date: 2020-03-30 05:25:37
Also in:
lkml
Subsystem:
broadcom brcm80211 ieee802.11 wireless drivers, the rest · Maintainers:
Arend van Spriel, Linus Torvalds
Possibly related (same subject, not in this thread)
- 2020-04-01 · Re: [PATCH] brcmfmac: fix wrong location to get firmware feature · Jaehoon Chung <jh80.chung@samsung.com>
- 2020-03-30 · Re: [PATCH] brcmfmac: fix wrong location to get firmware feature · Kalle Valo <hidden>
sup_wpa feature is getting after setting feature_disable flag.
If firmware is supported sup_wpa feature, it's always enabled
regardless of feature_disable flag.
Fixes: b8a64f0e96c2 ("brcmfmac: support 4-way handshake offloading for WPA/WPA2-PSK")
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
---
drivers/net/wireless/broadcom/brcm80211/brcmfmac/feature.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/feature.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/feature.c
index 5da0dda0d899..0dcefbd0c000 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/feature.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/feature.c@@ -285,13 +285,14 @@ void brcmf_feat_attach(struct brcmf_pub *drvr) if (!err) ifp->drvr->feat_flags |= BIT(BRCMF_FEAT_SCAN_RANDOM_MAC); + brcmf_feat_iovar_int_get(ifp, BRCMF_FEAT_FWSUP, "sup_wpa"); + if (drvr->settings->feature_disable) { brcmf_dbg(INFO, "Features: 0x%02x, disable: 0x%02x\n", ifp->drvr->feat_flags, drvr->settings->feature_disable); ifp->drvr->feat_flags &= ~drvr->settings->feature_disable; } - brcmf_feat_iovar_int_get(ifp, BRCMF_FEAT_FWSUP, "sup_wpa"); brcmf_feat_firmware_overrides(drvr);
--
2.26.0