[PATCH AUTOSEL 5.5 109/542] rtw88: fix rate mask for 1SS chip
From: Sasha Levin <sashal@kernel.org>
Date: 2020-02-14 18:17:15
Also in:
lkml, netdev, stable
Subsystem:
realtek wireless driver (rtw88), the rest · Maintainers:
Ping-Ke Shih, Linus Torvalds
From: Ping-Ke Shih <pkshih@realtek.com> [ Upstream commit 35a68fa5f96a80797e11b6952a47c5a84939a7bf ] The rate mask is used to tell firmware the supported rate depends on negotiation. We loop 2 times for all VHT/HT 2SS rate mask first, and then only keep the part according to chip's NSS. This commit fixes the logic error of '&' operations for VHT/HT rate, and we should run this logic before adding legacy rate. To access HT MCS map, index 0/1 represent MCS 0-7/8-15 respectively. Use NL80211_BAND_xxx is incorrect, so fix it as well. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Yan-Hsuan Chuang <redacted> Reviewed-by: Chris Chiu <redacted> Signed-off-by: Kalle Valo <redacted> Signed-off-by: Sasha Levin <sashal@kernel.org> --- drivers/net/wireless/realtek/rtw88/main.c | 12 +++++------- 1 file changed, 5 insertions(+), 7 deletions(-)
diff --git a/drivers/net/wireless/realtek/rtw88/main.c b/drivers/net/wireless/realtek/rtw88/main.c
index ae61415e16654..f369ddca953af 100644
--- a/drivers/net/wireless/realtek/rtw88/main.c
+++ b/drivers/net/wireless/realtek/rtw88/main.c@@ -706,8 +706,8 @@ void rtw_update_sta_info(struct rtw_dev *rtwdev, struct rtw_sta_info *si) if (sta->vht_cap.cap & IEEE80211_VHT_CAP_SHORT_GI_80) is_support_sgi = true; } else if (sta->ht_cap.ht_supported) { - ra_mask |= (sta->ht_cap.mcs.rx_mask[NL80211_BAND_5GHZ] << 20) | - (sta->ht_cap.mcs.rx_mask[NL80211_BAND_2GHZ] << 12); + ra_mask |= (sta->ht_cap.mcs.rx_mask[1] << 20) | + (sta->ht_cap.mcs.rx_mask[0] << 12); if (sta->ht_cap.cap & IEEE80211_HT_CAP_RX_STBC) stbc_en = HT_STBC_EN; if (sta->ht_cap.cap & IEEE80211_HT_CAP_LDPC_CODING)
@@ -717,6 +717,9 @@ void rtw_update_sta_info(struct rtw_dev *rtwdev, struct rtw_sta_info *si) is_support_sgi = true; } + if (efuse->hw_cap.nss == 1) + ra_mask &= RA_MASK_VHT_RATES_1SS | RA_MASK_HT_RATES_1SS; + if (hal->current_band_type == RTW_BAND_5G) { ra_mask |= (u64)sta->supp_rates[NL80211_BAND_5GHZ] << 4; if (sta->vht_cap.vht_supported) {
@@ -750,11 +753,6 @@ void rtw_update_sta_info(struct rtw_dev *rtwdev, struct rtw_sta_info *si) wireless_set = 0; } - if (efuse->hw_cap.nss == 1) { - ra_mask &= RA_MASK_VHT_RATES_1SS; - ra_mask &= RA_MASK_HT_RATES_1SS; - } - switch (sta->bandwidth) { case IEEE80211_STA_RX_BW_80: bw_mode = RTW_CHANNEL_WIDTH_80;
--
2.20.1