[PATCH 1/2] dt: bindings: net: ath11k: add qcom,board_id definition
From: John Crispin <john@phrozen.org>
Date: 2019-12-17 16:43:42
Also in:
ath11k, linux-devicetree
Subsystem:
arm/qualcomm mailing list, networking drivers (wireless), open firmware and flattened device tree bindings, the rest · Maintainers:
Johannes Berg, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
We need to be able to define what id the board has allowing us to load the correct definition data. This patch adds the description of the required property. Signed-off-by: John Crispin <john@phrozen.org> --- .../devicetree/bindings/net/wireless/qcom,ath11k.yaml | 5 +++++ 1 file changed, 5 insertions(+)
diff --git a/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml b/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml
index a1717db36dba..c68daf6ad424 100644
--- a/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml
+++ b/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml@@ -142,6 +142,11 @@ properties: * reg * reg-names + qcom,board_id: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + The board id defining what board definition should be loaded + required: - compatible - reg
--
2.20.1