RE: [EXTERNAL] [PATCHv2 0/5] Runtime PM support for wlcore

quoted

quoted

OK try replacing the pm_runtime_put_noidle() above with just
pm_runtime_put_sync(). The reason why I put noidle there was the
wlcore_fw_sleep() call, with that gone put_sync should do the trick.

I have tried that already. Same problem. The last call to:
ret =3D wlcore_raw_write32(wl, HW_ACCESS_ELP_CTRL_REG, ELPCTRL_SLEEP)

which allows the firmware to get into ELP state during wowlan suspend i=

s

quoted

only completing after system resume for some unknown reason...

=20
Hmm maybe try also adding wl1271_power_off(wl) after put_sync()?
=20

No, we don't want to power off the chip in wowlan mode.
We power it of only during standard suspend.

The trick is that it stays on during suspend and can be used=20
As a wakeup source to the host on specific packets received by
The firmware over the air.

BR,
Eyal