Re: [PATCH] iwlwifi: add device ID for Rivet Networks Killer Wireless-AC 1550

On Tue, 2018-03-27 at 15:38 +0300, Luciano Coelho wrote:

On Tue, 2018-03-27 at 15:37 +0300, Luciano Coelho wrote:

quoted

On Tue, 2018-03-27 at 14:03 +0200, Izzy Kulbe wrote:
Wait a bit.  This ID looks strange, someone else reported this
already
and it looked strange, with an incorrect subsystem vendor ID.

Can you run lspci like this and let us know the results?
weird 
lspci -nv -s 3b:00.0

Sorry, please substitute the 3b:00.0 with the correct PCI slot in your
system.  If you're not sure, remove the '-s 3b:00.0' entirely so we'll
get the results for all devices.

--
Luca.

The subsystem device in lspci itself reports "Bigfoot Networks, 
Inc. Wireless-AC 9260" instead of when lookup is enabled. AFAIR this
was a company that was bought by Qualcomm? So not Rivet/Killer. 

Here's the lspci output:

root@dokidoki $> # lspci-nv -s 04:00.0
04:00.0 0280: 8086:2526 (rev 29)
	Subsystem: 1a56:1550
	Flags: bus master, fast devsel, latency 0, IRQ 17
	Memory at d3d00000 (64-bit, non-prefetchable) [size=16K]
	Capabilities: [c8] Power Management version 3
	Capabilities: [d0] MSI: Enable- Count=1/1 Maskable- 64bit+
	Capabilities: [40] Express Endpoint, MSI 00
	Capabilities: [80] MSI-X: Enable+ Count=16 Masked-
	Capabilities: [100] Advanced Error Reporting
	Capabilities: [14c] Latency Tolerance Reporting
	Capabilities: [154] L1 PM Substates
	Kernel driver in use: iwlwifi
	Kernel modules: iwlwifi