On 10/25/2017 01:43 PM, David Ashley wrote:

I'm trying to understand how the linux kernel loads RTL8188CUS firmware
rtlwifi: Loading alternative firmware rtlwifi/rtl8192cufw.bin
when that file isn't available anywhere in my embedded system's filesystem.

Basically I'm trying to understand the theory. We have a product that
is making use of the device

Bus 001 Device 007: ID 7392:7811 Edimax Technology Co., Ltd
EW-7811Un802.11n Wireless Adapter [Realtek RTL8188CUS]

It has not been especially reliable. I've never provided firmware
files for the device in the root filesystem. I've started to pay
attention to the kernel error messages. Now the kernel drivers seem to
be loading the rtlwifi/rtl8192cufw_TMSC.bin file and I'm trying to
understand if this is actually working, if it makes any difference in
reliability...

It's like I can't figure out how the usb dongle even worked without
its firmware file...

My working theory is that the usb dongle comes from the factory with a
hardcoded firmware file (rtlwifi/rtl8192cufw.bin) but it is buggy or
inferior. And the performance and reliability can be improved if the
driver successfully manages to load the rtl8192cufw_TMSC.bin file. I
don't know if the firmware load persists across a power cycle (my
assumption is it doesn't).

There is NO firmware coded by the factory in the device. It only has enough 
intelligence to load the real firmware. The exact file that it loads is 
determined by the model. If you provide the appropriate section of the output of 
dmesg where the above firmware messages occur, and a file listing of 
/lib/firmware/rtlwifi/, I can tell you what firmware is being loaded.

No, firmware will not persist across a power failure.

The driver has never been particularly reliable, and the USB group at Realtek 
seems not to care. You might try their other driver, but you will be on your 
own, as I will not support that particular piece of ****.

Please reply to all on any followups.

Larry