Re: [v5] wlcore: add missing nvs file name info for wilink8

"Reizer, Eyal" [off-list ref] writes:

The following commits:
c815fde wlcore: spi: Populate config firmware data
d776fc8 wlcore: sdio: Populate config firmware data

It's recommended to use 12 chars when abbreviating commit ids so the
format should be this:

c815fdebef44 wlcore: spi: Populate config firmware data
d776fc86b82f wlcore: sdio: Populate config firmware data

Populated the nvs entry for wilink6 and wilink7 only while it is
still needed for wilink8 as well.
This broke user space backward compatibility when upgrading from older
kernels, as the alternate mac address would not be read from the nvs that is
present in the file system (lib/firmware/ti-connectivity/wl1271-nvs.bin)
causing mac address change of the wlan interface.

This patch fix this and update the structure field with the same default
nvs file name that has been used before.

In addition, some distros hold a default wl1271-nvs.bin in the file
system with a bogus mac address (deadbeef...) that for a wl18xx device
also overrides the mac address that is stored inside the device.
Warn users about this bogus mac address and use a random mac instead

Cc: stable <redacted>
Signed-off-by: Eyal Reizer <redacted>

It's always good to have a fixes line(s) and specify which stable
versions should have the fix. As the commit were first in v4.9-rc1
that's the first version we want this to be included:

Fixes: c815fdebef44 ("wlcore: spi: Populate config firmware data")
Fixes: d776fc86b82f ("wlcore: sdio: Populate config firmware data")
Cc: <redacted> # 4.9+

But if you don't submit a new version I can fix the commit log during
commit.

-- 
Kalle Valo