[PATCHv2 3/4] dt: bindings: add new dt entry for BTCOEX feature in qcom,ath10k.txt
From: <hidden>
Date: 2016-11-17 11:44:44
Also in:
linux-devicetree, lkml
Subsystem:
arm/qualcomm mailing list, networking drivers (wireless), open firmware and flattened device tree bindings, the rest · Maintainers:
Johannes Berg, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
From: Tamizh chelvam <redacted> There two things done in this patch. 1) 'btcoex_support' flag for BTCOEX feature support by the hardware. 2) 'wlan_btcoex_gpio' is used to fill wlan priority pin number for BTCOEX priority feature support. Signed-off-by: Tamizh chelvam <redacted> --- .../bindings/net/wireless/qcom,ath10k.txt | 4 ++++ 1 file changed, 4 insertions(+)
diff --git a/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt b/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt
index 74d7f0a..08150e2d 100644
--- a/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt
+++ b/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt@@ -46,6 +46,10 @@ Optional properties: hw versions. - qcom,ath10k-pre-calibration-data : pre calibration data as an array, the length can vary between hw versions. +- btcoex_support : should contain eithr "0" or "1" to indicate btcoex + support by the hardware. +- btcoex_gpio_pin : btcoex gpio pin number for the device which + supports BTCOEX. Example (to supply the calibration data alone):
--
1.7.9.5