Hi Krishnan,

Here is sample 11ac config file:

interface=uap0
driver=nl80211
ssid=mwifiex-11ac
hw_mode=a
channel=36
beacon_int=100
dtim_period=1
rts_threshold=2347
fragm_threshold=2346
auth_algs=1
send_probe_response=0
wmm_enabled=1
ieee80211n=1
ht_capab=[HT40+]
ieee80211ac=1
vht_oper_chwidth=1
vht_oper_centr_freq_seg0_idx=42

Thanks,
Avinash

On Thu, Jul 31, 2014 at 11:24 AM, Krishnankutty Plachikkattle
[off-list ref] wrote:

Hello Bing,

I am trying to enable HT support for 88W8897  using hostapd 2.2.
80211n mode works well . Now I want to enable AC mode to improve throughput .

Can you share a sample hostapd.conf  with  80211ac configuration.

Thanks in advance,

Regards,
Krishnan.

-----Original Message-----
From: Bing Zhao [mailto:bzhao@marvell.com]
Sent: Friday, May 30, 2014 6:16 AM
To: Avinash Patil; Krishnankutty Plachikkattle; linux-wireless@vger.kernel.org
Subject: RE: Support for 88W8897 in 3.10.17 kernel

quoted

quoted

Is there any open source driver that supports  NFC and Bluetooth in this SoC?

Yes; btmrvl.ko and btusb.ko would support PCIe-USB8897 BT functionality.
Please check CONFIG_BT_MRVL kernel configuration parameter.

Clarification:
btmrvl driver only supports Bluetooth over SDIO (btmrvl_sdio). So it's for SD8897 cards only.
The generic btusb driver works for PCIe-USB 8897 cards (Bluetooth is over USB).

Regards,
Bing

quoted

For NFC,  nfcmrvl.ko & nfcmrvl_usb.ko would support 8897 NFC functionality.
Please check for CONFIG_NFC_MRVL kernel configuration parameter.

Thanks,
Avinash

________________________________

http://www.mindtree.com/email/disclaimer.html