On Tue, Jul 30, 2013 at 3:04 PM, Luciano Coelho [off-list ref] wrote:

Hi,

This patch series adds device tree support to the wlcore_sdio driver,
which is used by WiLink6, WiLink7 and WiLink8.

The first patches do some clean-up to make the data needed in the
wilink device tree node smaller.  The remaining patches implement the
actual device tree node parsing in wlcore_sdio.

Regarding the XTAL clock issues, for now we don't support XTAL mode
with DT, but I have sent a proposal for a small change in the clock
framework to support this, but it's still under discussions [1].

The DTS file changes will be sent separately, since they need to go
via different trees.

A new version of the bindings documentation has been sent [2] and, if
no more comments are given to it, I'll apply it via my tree.

[1] http://news.gmane.org/find-root.php?message_id=1372971912-10877-1-git-send-email-coelho@ti.com
[2] http://news.gmane.org/find-root.php?message_id=1375109728-5931-1-git-send-email-coelho@ti.com

Changes in v4:

* Rebased on top of 3.11-rc3 (eg. no more changes on the board files
  that were removed);

* Use the new irq_get_trigger_type() instead of
  irqd_get_trigger_type() (thanks Javier);

* Added some missing const's (thanks Felipe);

* Reverted Tony's workaround to get WiLink to work on Panda while DT
  was not supported yet.


Please review.

What is the state of the series? Who is now responsible for the
patches? What issues were still not handled?

Yegor

Luciano Coelho (8):
  wl1251: split wl251 platform data to a separate structure
  wlcore: set irq_flags in the board files instead of hiding behind a
    quirk
  wlcore: remove pwr_in_suspend from platform data
  wl12xx: use frequency instead of enumerations for pdata clocks
  wlcore: add initial device tree support to the sdio module
  wlcore: sdio: add wilink clock providers
  wlcore: sdio: get clocks from device tree
  wlcore/wl12xx: check if we got correct clock data from DT

 arch/arm/mach-davinci/board-da850-evm.c        |  11 ++-
 arch/arm/mach-omap2/board-omap3evm.c           |  22 ++++-
 arch/arm/mach-omap2/board-omap3pandora.c       |   4 +-
 arch/arm/mach-omap2/board-rx51-peripherals.c   |   2 +-
 arch/arm/mach-omap2/board-zoom-peripherals.c   |  33 +++++++-
 arch/arm/mach-omap2/devices.c                  |  39 ---------
 drivers/net/wireless/ti/wilink_platform_data.c |  37 ++++++--
 drivers/net/wireless/ti/wl1251/sdio.c          |  12 +--
 drivers/net/wireless/ti/wl1251/spi.c           |   2 +-
 drivers/net/wireless/ti/wl12xx/main.c          |  78 +++++++++++++++--
 drivers/net/wireless/ti/wl12xx/wl12xx.h        |  28 +++++++
 drivers/net/wireless/ti/wlcore/debugfs.c       |   2 +-
 drivers/net/wireless/ti/wlcore/main.c          |  20 ++---
 drivers/net/wireless/ti/wlcore/sdio.c          | 112 +++++++++++++++++++++++--
 drivers/net/wireless/ti/wlcore/wlcore.h        |   5 +-
 drivers/net/wireless/ti/wlcore/wlcore_i.h      |   1 +
 include/linux/wl12xx.h                         |  52 +++++-------
 17 files changed, 340 insertions(+), 120 deletions(-)

--
1.8.3.2

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/