Re: Switching band of a dual-band WiFi device

On 15/08/13 17:30, Siyu Qiu wrote:

hi, do you mean that you take the wireless card from tplink and embed it
into your pc ? Does it work ? Coz i want to put qca 9889 into pc but the
info about network controller is :!!! unknown type 7f

Hi Siyu Qio,

I'm not sure to understand your question, but this is what I did
- went to the shop to buy this USB stick
- plugged it in a USB slot of my PC

And now I'm trying to understand if I can switch/enable/disable these 2 
bands, and more importantly, do I really need to?
Right now, my feeling is that "it just works out of the box", I 
shouldn't try to do this kind of things. I just try to understand this 
dual-band thing.

Chris

PS: Can you reply on the mailing list instead of sending private email 
please?

On Aug 14, 2013 10:12 PM, "Christian Gagneraud" <chgans@gna.org
<mailto:chgans@gna.org>> wrote:

    Hi there,

    I am using a TP-Link TL-WDN3200 on a ubuntu 13.04 (kernel
    3.8.0-27-generic), and I have install relevant modules with
    backports-3.11-rc3-1.

    I would like to switch my WiFi stick to 5GHz, I tried iwconfig wlan0
    freq 5G, but I get ENOTSUPP.
    Is the freq settings suppose to handle this 2.4 vs 5GHz band or is
    it only for selecting channel frequency within a given band?

    Does linux-wireless provides a way for selecting 2.4 or 5GHz band?

    "iw phy phy11 info" tells me that in band 2, all the frequencies are
    disabled except:
                             * 5745 MHz [149] (30.0 dBm)
                             * 5755 MHz [151] (30.0 dBm)
                             * 5765 MHz [153] (30.0 dBm)
                             * 5775 MHz [155] (30.0 dBm)
                             * 5785 MHz [157] (30.0 dBm)
                             * 5795 MHz [159] (30.0 dBm)
                             * 5805 MHz [161] (30.0 dBm)
                             * 5825 MHz [165] (30.0 dBm)

    As well, my understanding of WiFi might be a bit limited but, does a
    dual-band WiFi device provides 2.4 and 5GHz services at the same
    time or do I need to select one or the other myself? Or maybe I can
    just enable/disable them manually (and separately)?

    Hope someone can shed some light at this.

    Regards,
    Chris
    --
    To unsubscribe from this list: send the line "unsubscribe
    linux-wireless" in
    the body of a message to majordomo@vger.kernel.org
    <mailto:majordomo@vger.kernel.org>
    More majordomo info at http://vger.kernel.org/__majordomo-info.html
    <http://vger.kernel.org/majordomo-info.html>