Thread (77 messages) 77 messages, 3 authors, 2012-12-05

Re: [PATCH v2 00/22] brcmsmac: Tx rework and expanded debug/trace support

From: Seth Forshee <hidden>
Date: 2012-11-21 14:35:33

On Wed, Nov 21, 2012 at 10:56:47AM +0100, Daniel Wagner wrote:
On 21.11.2012 10:44, Arend van Spriel wrote:
quoted
On 11/20/2012 11:45 PM, Daniel Wagner wrote:
quoted
quoted
I am currently not able to reproduce a complete loss of connectivity.
I fear it is a heisenbug. After turning the tracing off I was able to
reproduce it very easily.
Just to clarify, you see the issue using the same kernel but without
trace-cmd running? If so you might try disabling the brcmsmac_tx
tracepoing, which probably adds the most overhead, and see if you can
reproduce the problem. It obviously won't give as much information but
maybe it will still provide some clues.
quoted
That is too bad. I always wondered about the tracing overhead affecting 
reproducibility. So the trace that you uploaded was not showing the 
issue of connection loss you are having?
The trace does only show that the throughput goes considerable down and the 
download might even stop shortly but overall the system recovers again.

Well, to add some random observation here, I think I see the same pattern
when using MacOS (yeah, sorry, dual boot). With MacOS the link is usable but
the throughput sometimes really goes down and recovers then. Obviously, this
could also be something else, I tried it with an pretty old AP which only
support 11g. Using the 11g AP didn't show this behavior.

My 'test' setup is following: I downloaded a larger file and let a youtube 
video play. With tracing enabled the download and the playback did work nicely.

Without tracing enabled playing back only a youtube video was 'triggering' 
the problem. It downloads a few seconds of content in a burst and then the playback
starts. Under normal conditions, the app will continue downloading the video at a 
lower rate. But this normally doesn't happen right now. Often it will just stop
working and often the connection is completely blocked, e.g. pinging a host
wont work.
I'll see if I can reproduce, but if it's specific to the AP then I may
not have any luck. Don't expect to hear much from me until next week
though; I'm on holiday starting today and will be visiting family.

Seth
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help