Re: [PATCH 4/4] ath9k_hw: do not limit initial tx power to 20 dbm

When testing for tx power, bypass the default limits.

Signed-off-by: Felix Fietkau <redacted>
---
 drivers/net/wireless/ath/ath9k/hw.c |    9 ++++++---
 1 files changed, 6 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/ath/ath9k/hw.c

index 8006ce0..a2e5763 100644

--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c

@@ -2432,15 +2432,18 @@ void ath9k_hw_set_txpowerlimit(struct ath_hw *ah, u32

 	struct ath_regulatory *regulatory = ath9k_hw_regulatory(ah);
 	struct ath9k_channel *chan = ah->curchan;
 	struct ieee80211_channel *channel = chan->chan;
+	int reg_pwr = min_t(int, MAX_RATE_POWER, regulatory->power_limit);
+	int chan_pwr = channel->max_power * 2;
+
+	if (test)
+		reg_pwr = chan_pwr = MAX_RATE_POWER;

 	regulatory->power_limit = min(limit, (u32) MAX_RATE_POWER);

 	ah->eep_ops->set_txpower(ah, chan,
 				 ath9k_regd_get_ctl(regulatory, chan),
 				 channel->max_antenna_gain * 2,
-				 channel->max_power * 2,
-				 min((u32) MAX_RATE_POWER,
-				 (u32) regulatory->power_limit), test);
+				 chan_pwr, reg_pwr, test);
 }
 EXPORT_SYMBOL(ath9k_hw_set_txpowerlimit);