Re: Getting ASUS USB-N53 out of CONFIG_RT2800USB_UNKNOWN
From: Maximilian Engelhardt <hidden>
Date: 2012-08-26 19:41:37
Hi Gertjan, On Sunday 26 August 2012 21:21:05 Gertjan van Wingerde wrote:
Hi Maxi, On 08/26/12 15:33, Maximilian Engelhardt wrote:quoted
Hallo, I recently bought an Asus USB-N53 Dual Band Wireless Network Adapter and noticed that I have to enable CONFIG_RT2800USB_UNKNOWN to get it working. With this option enabled everything is working fine as far as I have tested. So I'd line to get things right and move this device out of CONFIG_RT2800USB_UNKNOWN to where it belongs.Thanks for identifying the adapter. Moving it out of CONFIG_RT2800USB_UNKNOWN is definitely the way to go.quoted
Here is the information I have about this device, feel tree to ask if you need anything addition. Asus Website about the device: http://www.asus.com/Networks/Wireless_Adapters/USBN53/ output of lsusb: Bus 005 Device 013: ID 0b05:179d ASUSTek Computer, Inc. USB-N53 802.11abgn Network Adapter [Ralink RT3572] output of dmesg: usb 5-6: new high-speed USB device number 13 using ehci_hcd usb 5-6: New USB device found, idVendor=0b05, idProduct=179d usb 5-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 5-6: Product: 802.11 n WLAN usb 5-6: Manufacturer: Ralink usb 5-6: SerialNumber: 1.0 usb 5-6: reset high-speed USB device number 13 using ehci_hcd ieee80211 phy6: Selected rate control algorithm 'minstrel_ht' Registered led device: rt2800usb-phy6::radio Registered led device: rt2800usb-phy6::assoc Registered led device: rt2800usb-phy6::quality So according to lsusb this is a RT3572 device, which does also match with the chip description from ralink: http://www.ralinktech.com/en/02_products/product.php?sn=1009 I suggest moving the device to the CONFIG_RT2800USB_RT35XX section in rt2800usb.c, see attached patch.We need a proper Signed-off-by line from you in accordance with the patch submission procedures. I can pick up your patch, add your Signed-off-by, and submit it for inclusion upstream, but you have to confirm that you are OK with me adding your Signed-off-by to the patch.
Here you go. Signed-off-by: Maximilian Engelhardt <redacted>
quoted
diff --git a/drivers/net/wireless/rt2x00/rt2800usb.cb/drivers/net/wireless/rt2x00/rt2800usb.c index 6cf3365..6681bfc 100644--- a/drivers/net/wireless/rt2x00/rt2800usb.c +++ b/drivers/net/wireless/rt2x00/rt2800usb.c@@ -1157,6 +1157,8 @@ static struct usb_device_id rt2800usb_device_table[]= {> { USB_DEVICE(0x1690, 0x0744) }, { USB_DEVICE(0x1690, 0x0761) }, { USB_DEVICE(0x1690, 0x0764) }, + /* ASUS */ + { USB_DEVICE(0x0b05, 0x179d) }, /* Cisco */ { USB_DEVICE(0x167b, 0x4001) }, /* EnGenius */@@ -1222,7 +1224,6 @@ static struct usb_device_id rt2800usb_device_table[]= {> { USB_DEVICE(0x0b05, 0x1760) }, { USB_DEVICE(0x0b05, 0x1761) }, { USB_DEVICE(0x0b05, 0x1790) }, - { USB_DEVICE(0x0b05, 0x179d) }, /* AzureWave */ { USB_DEVICE(0x13d3, 0x3262) }, { USB_DEVICE(0x13d3, 0x3284) },--- Gertjan
Thanks for your help.
Attachments
- signature.asc [application/pgp-signature] 836 bytes