2012/8/5 Thomas Huehn [off-list ref]:

Hi Nick

quoted

According to EEPROM docs there are 10 calibration piers on all chips
after 5111 for 11a but some of them are not used and the way to test
this is if frequency is zero. Now here is a bug in the EEPROM code
that might result the wrong reads you get, check this out:

on ath5k_eeprom_read_freq_list we do this

if (!freq1)
 break;

instead of this

if (!freq1)
 continue;

That did the trick !
So reading 10 calibration piers and using the fix from above works in
terms of tx_power changes on CM9 and DCMA82 are properly used by the
hardware.

I will send a patch for that.


Greetings Thomas

I have some time right now so I'll re-send my patches (one of them
needs a fix anyway) together with this one to make John's job easier.
Send your EEPROM patch on top of them so that he can see it (remember
to CC him).


-- 
GPG ID: 0xEE878588
As you read this post global entropy rises. Have Fun ;-)
Nick