Re: 3.4-merge: iwlwifi needs more than 1 minute to connect

Just to close this thread ...

the problem has been fixed with this patch from Johannes Berg:

http://marc.info/?l=linux-wireless&m=133296144416566&w=2

Regards,
Oliver

On 26.03.2012 17:20, Oliver Hartkopp wrote:

Sorry - my assumption was too fast ...


At the fourth reboot i got the problem even with the reverted patches from Amit.

Sorry for the noise :-(

[   15.118888] wlan0: authenticate with bc:05:43:94:1a:da
[   15.122519] wlan0: send auth to bc:05:43:94:1a:da (try 1/3)
[   15.160486] wlan0: authenticated
[   15.160625] wlan0: waiting for beacon from bc:05:43:94:1a:da
[   15.189007] iwlwifi 0000:02:00.0: ACTIVATE a non DRIVER active station id 0 addr bc:05:43:94:1a:da
[   28.270782] wlan0: authenticate with bc:05:43:94:1a:da
[   28.274505] wlan0: send auth to bc:05:43:94:1a:da (try 1/3)
[   28.277125] wlan0: authenticated
[   28.277184] wlan0: waiting for beacon from bc:05:43:94:1a:da
[   28.306245] iwlwifi 0000:02:00.0: ACTIVATE a non DRIVER active station id 0 addr bc:05:43:94:1a:da
[   41.427670] wlan0: authenticate with bc:05:43:94:1a:da
[   41.431301] wlan0: send auth to bc:05:43:94:1a:da (try 1/3)
[   41.434021] wlan0: authenticated
[   41.434668] wlan0: associate with bc:05:43:94:1a:da (try 1/3)
[   41.437357] wlan0: RX AssocResp from bc:05:43:94:1a:da (capab=0x431 status=0 aid=3)
[   41.437363] wlan0: associated
[   41.447928] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready

Regards,
Oliver

On 26.03.2012 17:13, Oliver Hartkopp wrote:

quoted

On 26.03.2012 16:18, Oliver Hartkopp wrote:

quoted

On 26.03.2012 12:05, Johannes Berg wrote:

quoted

Hi Oliver,

quoted

i'm using the *very* latest 3.4-merge tree from Linus and my Wifi now needs
more than one minute to connect to my access point.

quoted

[   16.288562] wlan0: authenticate with bc:05:43:94:1a:da
[   16.299644] wlan0: send auth to bc:05:43:94:1a:da (try 1/3)
[   16.302060] wlan0: authenticated
[   16.302492] wlan0: waiting for beacon from bc:05:43:94:1a:da
[   16.432398] iwlwifi 0000:02:00.0: ACTIVATE a non DRIVER active station id 0 addr bc:05:43:94:1a:da

This is an odd message. I need to figure out how that can even happen.

What's the beacon interval on your AP? It seems more likely that this is
a problem with RX though.

Hi Johannes and Amit,

pointing to the RX path was a good idea!

I checked the commits of the last three weeks and discovered that it turns
out that the patches from Amit caused the regression:

iwlwifi: add testmode command for rx forwarding
http://git.kernel.org/?p=linux/kernel/git/torvalds/linux.git;a=commitdiff;h=0aef8ddc8bedac1db4c96fddc9fb1b44b730cf4f


iwlwifi: fixed testmode notifications length
http://git.kernel.org/?p=linux/kernel/git/torvalds/linux.git;a=commitdiff;h=8e81f65fdc7f5d292bb3c115b748767d921823c1

I reverted them in the opposite order (of course) and now the issue is gone.

Regards,
Oliver