Hello

On Tue, Jan 24, 2012 at 06:37:45PM +0100, Andreas Hartmann wrote:

Stanislaw Gruszka schrieb:

quoted

This seems to be only needed as workaround for hardware problem on 
PCI devices.

I tested this series (with all other resent patches applied) against a
rt3572usb based device (Linksys WUSB600N) on to different machines
(64bit smp (linux 3.2.1) and 32bit single core (linux 2.6.37.6)). I
couldn't see any functional change. Unfortunately it's as bad as
always :-(.

But one thing is new: I'm getting now these errors in messages (with
kernel 3.2.1) in the moment of the stall (which never stops until the
module is unloaded (or I didn't display enough patience)):


Jan 24 18:10:23 nb kernel: [  798.289036] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x101c with error -71.

This is write to BBP_CSR_CFG. I don't know, which patch is is responsible
for that error (patch4 looks most suspicious), can you check those 4 patches
one by one, and tell us which is causing this error? 

Thanks
Stanislaw