Re: [rt2x00-users] rt2800usb broken for rt3070

Hi,

Once again, please reply to all the recipients (including the mailing lists)
else I won't answer again.

2011/5/10 Rubén Pérez [off-list ref]:

Hi....
The problem was the firmware, effectively it was not the latest.... Ive
updated the firmware as you told me and it was working... I've also updated
to the latest daily build from compat-wireless....
But now, Im having another problem.... Pings are very slow....
64 bytes from 192.168.10.4: icmp_req=1 ttl=64 time=267 ms
64 bytes from 192.168.10.4: icmp_req=2 ttl=64 time=188 ms
64 bytes from 192.168.10.4: icmp_req=3 ttl=64 time=109 ms
64 bytes from 192.168.10.4: icmp_req=4 ttl=64 time=30.2 ms
64 bytes from 192.168.10.4: icmp_req=5 ttl=64 time=154 ms
64 bytes from 192.168.10.4: icmp_req=6 ttl=64 time=75.4 ms
64 bytes from 192.168.10.4: icmp_req=7 ttl=64 time=97.8 ms
64 bytes from 192.168.10.4: icmp_req=8 ttl=64 time=19.0 ms
64 bytes from 192.168.10.4: icmp_req=9 ttl=64 time=145 ms
64 bytes from 192.168.10.4: icmp_req=10 ttl=64 time=168 ms
64 bytes from 192.168.10.4: icmp_req=11 ttl=64 time=89.2 ms

It is a known issue, that hasn't got yet to the compat-wireless tree,
it should eventually.

Apply this patch, and that should solve it...

http://git.kernel.org/?p=linux/kernel/git/ivd/rt2x00.git;a=commit;h=29c217871d172f092a238997c50bc44110150004

With the official Ralink driver is about 2-3ms.... Im completely sure the
chip is cool, and ive tried in two equal devices....
Thanks!



2011/5/10 Juan Carlos Garza [off-list ref]

quoted

Hi,

please reply to all when replying, the thread discussed here might
help someone else in the future.

2011/5/10 Rubén Pérez [off-list ref]:

quoted

according with the ralink support page:
http://www.ralinktech.com/support.php?s=2
The latest version for rt28XX/rt30XX is the 22. maybe Im wrong because i
can
see the release date is quite old....

I am attaching the firmware file for revision 29. Ralink does not have
an updated version in their support page.
md5sum: 36c944c3138125605d28c0a3a1338be9

quoted

By the way, I'll try later the daily version as well as another older
version, but the version I'm currently using is suppose to be stable and
the
development of this driver is no so new....

Sometimes the newer the better.

quoted

Thanks for your attention!
Regards
Rubén

2011/5/10 Juan Carlos Garza [off-list ref]

quoted

Hi, below my comments.

2011/5/9 Rubén Pérez [off-list ref]

quoted

Hi....

Ive tried the latest version from wireless-compat 2.6.39 on a 2.6.29
rt-kernel and it's not working.... everytime I get no scan
results.... I
paste the debug output from the modprobe, ifconfig up, and iwlist
scan:


ocinante compat-wireless-2.6.39-rc6-1 # dmesg
[ 3301.701830] phy2 -> rt2x00_set_chip: Info - Chipset detected - rt:
3070, rf: 0005, rev: 0201.
[ 3301.703827] ieee80211 phy2: Selected rate control algorithm
'minstrel_ht'
[ 3301.731823] Registered led device: rt2800usb-phy2::radio
[ 3301.731958] Registered led device: rt2800usb-phy2::assoc
[ 3301.733136] Registered led device: rt2800usb-phy2::quality
[ 3301.733574] usbcore: registered new interface driver rt2800usb
[ 3306.369314] phy2 -> rt2x00lib_request_firmware: Info - Loading
firmware file 'rt2870.bin'.
[ 3306.386143] phy2 -> rt2x00lib_request_firmware: Info - Firmware
detected - version: 0.22.

I think that the latest version of the firmware is 0.29 (someone
correct me if i'm wrong),
so upgrading it might help.

quoted

[ 3306.618110] phy2 -> rt2x00mac_conf_tx: Info - Configured TX queue
0 -
CWmin: 3, CWmax: 4, Aifs: 2, TXop: 102.
[ 3306.619472] phy2 -> rt2x00mac_conf_tx: Info - Configured TX queue
1 -
CWmin: 4, CWmax: 5, Aifs: 2, TXop: 188.
[ 3306.620846] phy2 -> rt2x00mac_conf_tx: Info - Configured TX queue
2 -
CWmin: 5, CWmax: 10, Aifs: 3, TXop: 0.
[ 3306.622220] phy2 -> rt2x00mac_conf_tx: Info - Configured TX queue
3 -
CWmin: 5, CWmax: 10, Aifs: 7, TXop: 0.
[ 3334.829055] phy2 -> rt2x00queue_flush_queue: Warning - Queue 0
failed
to flush
[ 3334.842583] phy2 -> rt2x00usb_watchdog_tx_status: Warning - TX
queue
0 status timed out, invoke forced tx handler
[ 3337.087058] phy2 -> rt2x00queue_flush_queue: Warning - Queue 0
failed
to flush
rocinante compat-wireless-2.6.39-rc6-1 #


Im running it on a Geode (i586) plattform.....

Have you tried the daily compat-wireless builds? They contain some
good patches that will not appear until 2.6.40.

quoted

thanks
_______________________________________________
users mailing list
users@rt2x00.serialmonkey.com


http://rt2x00.serialmonkey.com/mailman/listinfo/users_rt2x00.serialmonkey.com

Regards,
--
Juan Carlos Garza

--
Juan Carlos Garza

-- 
Juan Carlos Garza