On Sun, 2011-01-23 at 03:25 -0800, Bernhard Schmidt wrote:

On Saturday 22 January 2011 01:06:39 Wey-Yi Guy wrote:

quoted

From: Wey-Yi Guy <redacted>

Adding 2000 series devices supports, the 2000 series devices has
many different SKUs which includes 1x1 and 2x2 devices,also with
and without BT combo.

Signed-off-by: Wey-Yi Guy <redacted>
[..]
+
+#define IWL_DEVICE_2030						\
+	.fw_name_pre = IWL2030_FW_PRE,				\
+	.ucode_api_max = IWL2030_UCODE_API_MAX,			\
+	.ucode_api_min = IWL2030_UCODE_API_MIN,			\
+	.eeprom_ver = EEPROM_2000_EEPROM_VERSION,		\
+	.eeprom_calib_ver = EEPROM_2000_TX_POWER_VERSION,	\
+	.ops = &iwl2030_ops,					\
+	.mod_params = &iwlagn_mod_params,			\
+	.base_params = &iwl2030_base_params,			\
+	.bt_params = &iwl2030_bt_params,			\
+	.need_dc_calib = true,					\
+	.need_temp_offset_calib = true,				\
+	.led_mode = IWL_LED_RF_STATE,				\
+	.adv_pm = true						\
+
+struct iwl_cfg iwl2030_2bgn_cfg = {
+	.name = "2000 Series 2x2 BGN/BT",
+	IWL_DEVICE_2000,
+	.ht_params = &iwl2000_ht_params,
+};
+
+struct iwl_cfg iwl2030_2bg_cfg = {
+	.name = "2000 Series 2x2 BG/BT",
+	IWL_DEVICE_2000,
+};

Shouldn't these use the IWL_DEVICE_2030 macro?

good catch, thank you very much, will submit separated patch to address
it

Wey