Re: [PATCH v3 9/9] omap: zoom: add mmc3/wl1271 device support

Oops didn't notice ,,,

Thanks,
Kishore

On Thu, Aug 12, 2010 at 1:42 AM, Ohad Ben-Cohen [off-list ref] wrote:

Hi Kishore,

On Wed, Aug 11, 2010 at 11:09 PM, kishore kadiyala
[off-list ref] wrote:

quoted

Since you specified the voltage source is fixed, and if MMC3 has any
dedicated regulator as MMC1 & MMC2 you can go with
Roger's comments.

You are reading an old batch of the patches.

Scroll down to v4 ;)

Thanks,
Ohad.

quoted

If the LDO is fixed voltage source from TWL then since regulator
framework supports only adjustable LDO's, I think you can
have ocr_mask defined as above in board file.

Regards,
Kishore

quoted

Removed, thanks!
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html