Re: [RFT V2] rtl8187: Fix OFDM power settings for RTL8187L

Larry Finger wrote:

Hauke,

Please apply this patch on top of current wireless-testing, or
compat-wireless.

V1 only did one of the two kinds of radios.

Larry

Hi Larry,

With this patch included and pid the rate goes up to 24Mb/s, but the
connection is stable. Without this patch is is only up to 11Mb/s. The
connection is still unusable with minstrel, it goes up too fare. It
starts with 24Mb/s and the connection drops. After some time it goes up
to 54Mb/s, but then it goes down again and the connection is working
again for a minute till the procedure begins again.

What do you mean with rc_stats ?

Complete iwconfig output with minstrel (No connection):
wlan0     IEEE 802.11bg  ESSID:"mehrtenswlan"
          Mode:Managed  Frequency:2.412 GHz  Access Point:
00:1A:92:EA:73:12
          Bit Rate=48 Mb/s   Tx-Power=27 dBm
          Retry min limit:7   RTS thr:off   Fragment thr=2352 B
          Power Management:off
          Link Quality=57/100  Signal level:-52 dBm
          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
          Tx excessive retries:0  Invalid misc:0   Missed beacon:0


dmesg |fgrep rtl shows the following:
phy0: hwaddr ffff8801399ac080, RTL8187vB (default) V1 + rtl8225z2
usbcore: registered new interface driver rtl8187