[PATCH] usb: chipidea: tegra: disable runtime PM on resume failure

tegra_usb_probe() enables runtime PM before resuming the device. If
pm_runtime_resume_and_get() fails, probe returns without disabling runtime
PM. The later error paths reach pm_runtime_force_suspend(), but this early
return bypasses that cleanup.

Disable runtime PM before returning the resume error. Do not use the
fail_power_off path: the failed resume did not retain a usage reference,
so its pm_runtime_put_sync_suspend() would be unbalanced.

This issue was identified during our ongoing static-analysis research while
reviewing kernel code.

Fixes: 8b85e11c1a7a ("usb: chipidea: tegra: Add runtime PM and OPP support")
Cc: stable@vger.kernel.org
Assisted-by: OpenAI:GPT-5.6
Co-developed-by: Ijae Kim <redacted>
Signed-off-by: Ijae Kim <redacted>
Signed-off-by: Myeonghun Pak <redacted>
---
 drivers/usb/chipidea/ci_hdrc_tegra.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/chipidea/ci_hdrc_tegra.c b/drivers/usb/chipidea/ci_hdrc_tegra.c
index 372788f0f..26225b034 100644
--- a/drivers/usb/chipidea/ci_hdrc_tegra.c
+++ b/drivers/usb/chipidea/ci_hdrc_tegra.c

@@ -306,8 +306,10 @@ static int tegra_usb_probe(struct platform_device *pdev)
 
 	pm_runtime_enable(&pdev->dev);
 	err = pm_runtime_resume_and_get(&pdev->dev);
-	if (err)
+	if (err) {
+		pm_runtime_disable(&pdev->dev);
 		return err;
+	}
 
 	if (device_property_present(&pdev->dev, "nvidia,needs-double-reset"))
 		usb->needs_double_reset = true;