Thread (6 messages) flat view 6 messages, 2 authors, 14d ago
COOLING14d

[PATCH 1/3] usb: xhci-pci: Add TUSB73x0 definitions

From: Fabio Estevam <festevam@gmail.com>
Date: 2026-09-09 12:58:51
Also in: lkml
Subsystem: the rest, usb subsystem, usb xhci driver · Maintainers: Linus Torvalds, Greg Kroah-Hartman, Mathias Nyman

Instead of hard-coding the TUSB73X0 PCI ID, USB_CTRL register address
and the PWRON_POLARITY, introduce definitions for them to make the code
easier to read.

No functional change.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
---
 drivers/usb/host/xhci-pci.c | 11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index a8889081ae82..c580e0b86011 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -28,6 +28,9 @@
 #define SPARSE_DISABLE_BIT	17
 #define SPARSE_CNTL_ENABLE	0xC12C
 
+#define TUSB73X0_USB_CTRL			0xe0
+#define TUSB73X0_PWRON_POLARITY			BIT(22)
+
 /* Device for a quirk */
 #define PCI_VENDOR_ID_FRESCO_LOGIC		0x1b73
 #define PCI_DEVICE_ID_FRESCO_LOGIC_PDK		0x1000
@@ -95,6 +98,8 @@
 #define PCI_DEVICE_ID_ASMEDIA_3042_XHCI			0x3042
 #define PCI_DEVICE_ID_ASMEDIA_3242_XHCI			0x3242
 
+#define PCI_DEVICE_ID_TI_TUSB73X0			0x8241
+
 static const char hcd_name[] = "xhci_hcd";
 
 static struct hc_driver __read_mostly xhci_pci_hc_driver;
@@ -479,7 +484,8 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
 	    pdev->device == PCI_DEVICE_ID_ASMEDIA_3042_XHCI)
 		xhci->quirks |= XHCI_RESET_ON_RESUME;
 
-	if (pdev->vendor == PCI_VENDOR_ID_TI && pdev->device == 0x8241)
+	if (pdev->vendor == PCI_VENDOR_ID_TI &&
+	    pdev->device == PCI_DEVICE_ID_TI_TUSB73X0)
 		xhci->quirks |= XHCI_LIMIT_ENDPOINT_INTERVAL_7;
 
 	if ((pdev->vendor == PCI_VENDOR_ID_BROADCOM ||
@@ -678,7 +684,8 @@ int xhci_pci_common_probe(struct pci_dev *dev, const struct pci_device_id *id)
 	dma_set_max_seg_size(&dev->dev, UINT_MAX);
 
 	if (device_property_read_bool(&dev->dev, "ti,pwron-active-high"))
-		pci_clear_and_set_config_dword(dev, 0xE0, 0, 1 << 22);
+		pci_clear_and_set_config_dword(dev, TUSB73X0_USB_CTRL, 0,
+					       TUSB73X0_PWRON_POLARITY);
 
 	return 0;
 
-- 
2.43.0
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help