Thread (2 messages) 2 messages, 2 authors, 2024-08-06
STALE669d LANDED

[PATCH] usb: dwc3: Use of_property_read_variable_u32_array() to read "power"

From: "Rob Herring (Arm)" <robh@kernel.org>
Date: 2024-07-31 20:14:41
Also in: lkml
Subsystem: designware usb3 drd ip driver, the rest, usb subsystem · Maintainers: Thinh Nguyen, Linus Torvalds, Greg Kroah-Hartman

There's no need to get the length of an DT array property before
parsing the array. of_property_read_variable_u32_array() takes a minimum
and maximum length and returns the actual length (or error code).

This is part of a larger effort to remove callers of of_find_property()
and similar functions. of_find_property() leaks the DT struct property
and data pointers which is a problem for dynamically allocated nodes
which may be freed.

Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
---
 drivers/usb/dwc3/dwc3-octeon.c | 19 ++++---------------
 1 file changed, 4 insertions(+), 15 deletions(-)
diff --git a/drivers/usb/dwc3/dwc3-octeon.c b/drivers/usb/dwc3/dwc3-octeon.c
index 6010135e1acc..1a3b205367fd 100644
--- a/drivers/usb/dwc3/dwc3-octeon.c
+++ b/drivers/usb/dwc3/dwc3-octeon.c
@@ -419,7 +419,7 @@ static int dwc3_octeon_probe(struct platform_device *pdev)
 	int ref_clk_sel, ref_clk_fsel, mpll_mul;
 	int power_active_low, power_gpio;
 	int err, len;
-	u32 clock_rate;
+	u32 clock_rate, gpio_pwr[3];
 
 	if (of_property_read_u32(node, "refclk-frequency", &clock_rate)) {
 		dev_err(dev, "No UCTL \"refclk-frequency\"\n");
@@ -476,21 +476,10 @@ static int dwc3_octeon_probe(struct platform_device *pdev)
 
 	power_gpio = DWC3_GPIO_POWER_NONE;
 	power_active_low = 0;
-	if (of_find_property(node, "power", &len)) {
-		u32 gpio_pwr[3];
-
-		switch (len) {
-		case 8:
-			of_property_read_u32_array(node, "power", gpio_pwr, 2);
-			break;
-		case 12:
-			of_property_read_u32_array(node, "power", gpio_pwr, 3);
+	len = of_property_read_variable_u32_array(node, "power", gpio_pwr, 2, 3);
+	if (len > 0) {
+		if (len == 3)
 			power_active_low = gpio_pwr[2] & 0x01;
-			break;
-		default:
-			dev_err(dev, "invalid power configuration\n");
-			return -EINVAL;
-		}
 		power_gpio = gpio_pwr[1];
 	}
 
-- 
2.43.0
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help