[PATCH V6 4/6] arm64: dts: qcom: sc7280: Add EUD dt node and dwc3 connector
flat view
STALE1713d
LANDED
From: Souradeep Chowdhury <quic_schowdhu@quicinc.com>
Date: 2022-02-08 17:57:42
Also in:
linux-arm-msm, linux-devicetree, lkml
Subsystem:
arm/qualcomm chromebook support, arm/qualcomm mailing list, arm/qualcomm support, the rest · Maintainers:
Bjorn Andersson, Konrad Dybcio, Linus Torvalds
Revision v6 of 5 in this series; landed in mainline as a0c68e493007 on 2022-02-11.
Revisions (5)
Add the Embedded USB Debugger(EUD) device tree node. The node contains EUD base register region and EUD mode manager register regions along with the interrupt entry. Also add the typec connector node for EUD which is attached to EUD node via port. EUD is also attached to DWC3 node via port. Also add the role-switch property to dwc3 node. Signed-off-by: Souradeep Chowdhury <quic_schowdhu@quicinc.com> --- arch/arm64/boot/dts/qcom/sc7280.dtsi | 36 ++++++++++++++++++++++++++++++++++++ 1 file changed, 36 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
index 937c2e0..96917fe 100644
--- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi@@ -2583,6 +2583,12 @@ phys = <&usb_2_hsphy>; phy-names = "usb2-phy"; maximum-speed = "high-speed"; + usb-role-switch; + port { + usb2_role_switch: endpoint { + remote-endpoint = <&eud_ep>; + }; + }; }; };
@@ -2624,6 +2630,36 @@ interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>; }; + eud: eud@88e0000 { + compatible = "qcom,sc7280-eud","qcom,eud"; + reg = <0 0x88e0000 0 0x2000>, + <0 0x88e2000 0 0x1000>; + interrupts-extended = <&pdc 11 IRQ_TYPE_LEVEL_HIGH>; + ports { + port@0 { + eud_ep: endpoint { + remote-endpoint = <&usb2_role_switch>; + }; + }; + port@1 { + eud_con: endpoint { + remote-endpoint = <&con_eud>; + }; + }; + }; + }; + + eud_typec: connector { + compatible = "usb-c-connector"; + ports { + port@0 { + con_eud: endpoint { + remote-endpoint = <&eud_con>; + }; + }; + }; + }; + nsp_noc: interconnect@a0c0000 { reg = <0 0x0a0c0000 0 0x10000>; compatible = "qcom,sc7280-nsp-noc";
--
2.7.4