Thread (22 messages) 22 messages, 5 authors, 2022-01-13

Re: USB 3.2 Gen 2x2 "Superspeed+20GBps" support for ASM3242

From: youling 257 <hidden>
Date: 2021-12-30 14:57:40

2021-12-30 21:30 GMT+08:00, Greg KH [off-list ref]:
On Thu, Dec 30, 2021 at 09:10:14PM +0800, youling257 wrote:
quoted
where i can find the series patch?
https://patchwork.kernel.org/project/linux-usb/list/?series=427561
There is nothing at that link.

What is the lore.kernel.org link for the patch you are curious about?
quoted
when i used maiwo k1690(10gbps) connect to ASM3242 Controller, only
500MB/s.
cat /sys/devices/pci0000:00/0000:00:01.3/0000:09:00.0/usb3/speed, 480
cat /sys/devices/pci0000:00/0000:00:01.3/0000:09:00.0/usb4/speed, 20000
maiwo k1690 is on
/sys/devices/pci0000:00/0000:00:01.3/0000:09:00.0/usb4/4-1.
cat /sys/devices/pci0000:00/0000:00:01.3/0000:09:00.0/usb4/4-1/speed,
5000


01:00.0 USB controller: ASMedia Technology Inc. ASM3242 USB 3.2 Host
Controller (prog-if 30 [XHCI])
        Subsystem: ASMedia Technology Inc. ASM3242 USB 3.2 Host
Controller

[    0.359281] xhci_hcd 0000:01:00.0: xHCI Host Controller
[    0.359283] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus
number 2
[    0.359285] xhci_hcd 0000:01:00.0: Host supports USB 3.2 Enhanced
SuperSpeed

[ 1191.734123] usb 4-1: new SuperSpeed USB device number 2 using xhci_hcd
[ 1191.794767] usb-storage 4-1:1.0: USB Mass Storage device detected
[ 1191.795049] scsi host9: usb-storage 4-1:1.0
[ 1051.051274] scsi 9:0:0:0: Direct-Access     Realtek  USB 3.2 Device
1.00 PQ: 0 ANSI: 6
[ 1051.051442] sd 9:0:0:0: Attached scsi generic sg0 type 0
[ 1051.054461] sd 9:0:0:0: [sda] 500118192 512-byte logical blocks: (256
GB/238 GiB)
[ 1051.055068] sd 9:0:0:0: [sda] Write Protect is off
[ 1051.055073] sd 9:0:0:0: [sda] Mode Sense: 37 00 00 08
[ 1051.055716] sd 9:0:0:0: [sda] Write cache: disabled, read cache:
enabled, doesn't support DPO or FUA
[ 1051.072131]  sda: sda1 sda2

i don't have NVMe to USB 2x2 Enclosure (ASM2364 chipset), i have NVMe to
USB 2x1 Enclosure (RTL9120B chipset), maiwo k1690, using it on PciExpress
X4 add in card (ASM3242 chipset), it only 5Gbps speed, should be 10Gbps.
Are you sure that your hardware can really support this?  Do you have
the right cable and the device will support this speed?
02:00.0 USB controller: Advanced Micro Devices, Inc. [AMD] 400 Series
Chipset USB 3.1 XHCI Controller (rev 01) (prog-if 30 [XHCI])
        Subsystem: ASMedia Technology Inc. 400 Series Chipset USB 3.1
XHCI Controller

maiwo k1690 connect to mainboard usb3.2 gen2x1 port can 10gbps.
[ 1049.965556] usb 2-2: new SuperSpeed Plus Gen 2x1 USB device number
2 using xhci_hcd
[ 1050.028280] usb-storage 2-2:1.0: USB Mass Storage device detected
[ 1050.028560] scsi host9: usb-storage 2-2:1.0

pcie to usb3.2 gen2x2 asm3242 should be compatible usb3.2 gen2x1.
I don't have windows os to test them, may be 5gbps on windows yet.
Is there a way to hack them to 10Gbps on linux?
And most important, what kernel version are you using?
kernel 5.16 rc7.
thanks,

greg k-h
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help