[PATCH v2 3/5] usb: Link the ports to the connectors they are attached to
From: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Date: 2021-12-13 10:34:35
Also in:
linux-acpi, lkml
Subsystem:
the rest, usb subsystem · Maintainers:
Linus Torvalds, Greg Kroah-Hartman
Creating link to the USB Type-C connector for every new port that is added when possible. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> --- Documentation/ABI/testing/sysfs-bus-usb | 9 +++++++ drivers/usb/core/port.c | 32 +++++++++++++++++++++++++ 2 files changed, 41 insertions(+)
diff --git a/Documentation/ABI/testing/sysfs-bus-usb b/Documentation/ABI/testing/sysfs-bus-usb
index 2ebe5708b4bc0..7efe31ed3a25c 100644
--- a/Documentation/ABI/testing/sysfs-bus-usb
+++ b/Documentation/ABI/testing/sysfs-bus-usb@@ -244,6 +244,15 @@ Description: is permitted, "u2" if only u2 is permitted, "u1_u2" if both u1 and u2 are permitted. +What: /sys/bus/usb/devices/.../<hub_interface>/port<X>/connector +Date: December 2021 +Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com> +Description: + Link to the USB Type-C connector when available. This link is + only created when USB Type-C Connector Class is enabled, and + only if the system firmware is capable of describing the + connection between a port and its connector. + What: /sys/bus/usb/devices/.../power/usb2_lpm_l1_timeout Date: May 2013 Contact: Mathias Nyman <mathias.nyman@linux.intel.com>
diff --git a/drivers/usb/core/port.c b/drivers/usb/core/port.c
index dfcca9c876c73..c2bbf97a79bec 100644
--- a/drivers/usb/core/port.c
+++ b/drivers/usb/core/port.c@@ -9,6 +9,7 @@ #include <linux/slab.h> #include <linux/pm_qos.h> +#include <linux/component.h> #include "hub.h"
@@ -528,6 +529,32 @@ static void find_and_link_peer(struct usb_hub *hub, int port1) link_peers_report(port_dev, peer); } +static int connector_bind(struct device *dev, struct device *connector, void *data) +{ + int ret; + + ret = sysfs_create_link(&dev->kobj, &connector->kobj, "connector"); + if (ret) + return ret; + + ret = sysfs_create_link(&connector->kobj, &dev->kobj, dev_name(dev)); + if (ret) + sysfs_remove_link(&dev->kobj, "connector"); + + return ret; +} + +static void connector_unbind(struct device *dev, struct device *connector, void *data) +{ + sysfs_remove_link(&connector->kobj, dev_name(dev)); + sysfs_remove_link(&dev->kobj, "connector"); +} + +static const struct component_ops connector_ops = { + .bind = connector_bind, + .unbind = connector_unbind, +}; + int usb_hub_create_port_device(struct usb_hub *hub, int port1) { struct usb_port *port_dev;
@@ -577,6 +604,10 @@ int usb_hub_create_port_device(struct usb_hub *hub, int port1) find_and_link_peer(hub, port1); + retval = component_add(&port_dev->dev, &connector_ops); + if (retval) + dev_warn(&port_dev->dev, "failed to add component\n"); + /* * Enable runtime pm and hold a refernce that hub_configure() * will drop once the PM_QOS_NO_POWER_OFF flag state has been set
@@ -619,5 +650,6 @@ void usb_hub_remove_port_device(struct usb_hub *hub, int port1) peer = port_dev->peer; if (peer) unlink_peers(port_dev, peer); + component_del(&port_dev->dev, &connector_ops); device_unregister(&port_dev->dev); }
--
2.33.0