[PATCH v2] net: usb: lan78xx: lan78xx_phy_init(): use PHY_POLL instead of "0" if no IRQ is available
From: Sven Schuchmann <hidden>
Date: 2021-11-27 10:50:52
Also in:
lkml, netdev
Subsystem:
networking drivers, the rest, usb lan78xx ethernet driver, usb networking drivers · Maintainers:
Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds, Thangaraj Samynathan, Rengarajan Sundararajan
On most systems request for IRQ 0 will fail, phylib will print an error message
and fall back to polling. To fix this set the phydev->irq to PHY_POLL if no IRQ
is available.
Fixes: cc89c323a30e ("lan78xx: Use irq_domain for phy interrupt from USB Int. EP")
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Sven Schuchmann <redacted>
---
Changes v1->v2: Added "Fixes" and "Reviewed-by"
---
drivers/net/usb/lan78xx.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/usb/lan78xx.c b/drivers/net/usb/lan78xx.c
index 2bfb59ae0eaf..185e08c1af31 100644
--- a/drivers/net/usb/lan78xx.c
+++ b/drivers/net/usb/lan78xx.c@@ -2398,7 +2398,7 @@ static int lan78xx_phy_init(struct lan78xx_net *dev) if (dev->domain_data.phyirq > 0) phydev->irq = dev->domain_data.phyirq; else - phydev->irq = 0; + phydev->irq = PHY_POLL; netdev_dbg(dev->net, "phydev->irq = %d\n", phydev->irq); /* set to AUTOMDIX */
--
2.17.1