USB control-message timeouts are specified in milliseconds and should
specifically not vary with CONFIG_HZ.
Fixes: 605bebe23bf6 ("[PATCH] Add rtl8187 wireless driver")
Cc: <redacted> # 2.6.23
Signed-off-by: Johan Hovold <johan@kernel.org>
Acked-by: Hin-Tak Leung <redacted>
---
.../net/wireless/realtek/rtl818x/rtl8187/rtl8225.c | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)
quoted hunk
diff --git a/drivers/net/wireless/realtek/rtl818x/rtl8187/rtl8225.c b/drivers/net/wireless/realtek/rtl818x/rtl8187/rtl8225.c
index 585784258c66..4efab907a3ac 100644
--- a/drivers/net/wireless/realtek/rtl818x/rtl8187/rtl8225.c
+++ b/drivers/net/wireless/realtek/rtl818x/rtl8187/rtl8225.c
@@ -28,7 +28,7 @@ u8 rtl818x_ioread8_idx(struct rtl8187_priv *priv,
usb_control_msg(priv->udev, usb_rcvctrlpipe(priv->udev, 0),
RTL8187_REQ_GET_REG, RTL8187_REQT_READ,
(unsigned long)addr, idx & 0x03,
- &priv->io_dmabuf->bits8, sizeof(val), HZ / 2);
+ &priv->io_dmabuf->bits8, sizeof(val), 500);
Looks reasonable, although I would have preferred a common defined value taken from a common header, instead of a hard-coded 1/2 second.