On Thu 26 Aug 01:15 CDT 2021, Felipe Balbi wrote:

Hi,

Bjorn Andersson [off-list ref] writes:

quoted

On Wed 25 Aug 10:59 PDT 2021, Bryan O'Donoghue wrote:

quoted

On 25/08/2021 16:53, Bjorn Andersson wrote:

quoted

But in the case of Type-C altmode several of our boards have either an
external gpio-based SBU-pin-swapper or some redriver on I2C with this
functionality, so we need a way to tell both the PHY and this external
contraption about the orientation.

Its a very similar problem to orientation switch

As an example

- redriver may need to fix up signal integrity for
  lane switching

- PHY needs to toggle lanes from one IP block to another

Right, conceptually the problem is similar, but IMHO there's a big
difference in that the redriver and PHY are two physically separate
entities - on different buses. The dwc3 glue and core represent the same
piece of hardware.

no they don't. The glue is a real piece of HW that adapts the "generic"
synopsys IP to a given SoC. OMAP, for example, was adapting Synopsys'
proprietary interface to the Sonics interconnect, while some others may
adapt it to AXI or PCI or whatever.

They are different HW blocks, the glue (in many cases) has its own IRQ,
its own address space, its own register file, and so on. Granted, the
glue also serves as an access port from CPU to the synopsys core, but
that's handled by `ranges' DT property.

So what you're saying is that the "Qualcomm glue" is the hardware, and
the core is just the basis for that design?

Regardless, on the Qualcomm platforms we have need to inform both
devices about role changes, how do we do this? (Without platform_data
and preferably without having to duplicate the typec code in the glue
and core and the two device nodes in DT)

Regards,
Bjorn