Thread (3 messages) 3 messages, 2 authors, 2021-08-23

Re: [PATCH v2] usb: dwc3: gadget: Stop EP0 transfers during pullup disable

From: Wesley Cheng <hidden>
Date: 2021-08-23 10:59:40
Also in: lkml

Hi Felipe,

On 8/23/2021 2:34 AM, Felipe Balbi wrote:
Wesley Cheng [off-list ref] writes:
quoted
During a USB cable disconnect, or soft disconnect scenario, a pending
SETUP transaction may not be completed, leading to the following
error:

    dwc3 a600000.dwc3: timed out waiting for SETUP phase

If this occurs, then the entire pullup disable routine is skipped and
proper cleanup and halting of the controller does not complete.
nit: might want to add a blank line between paragraphs to aid
readability
quoted
Instead of returning an error (which is ignored from the UDC
perspective), allow the pullup disable to routine to continue, which
                                         ^^
                                         remove this?
quoted
will also handle disabling of EP0/1.  This will end any active
transfers as well.  Ensure to clear any delayed_status as well, as the
timeout could happen within the STATUS stage.

Signed-off-by: Wesley Cheng <redacted>
---
Changes in v2:
 - Removed calls to dwc3_ep0_end_control_data() and just allow the ep disables
   on EP0 handle the proper ending of transfers.
 - Ensure that delayed_status is cleared, as ran into enumeration issues if the
   SETUP transaction fails on a STATUS stage.  Saw delayed_status == TRUE on the
   next connect, which blocked further SETUP transactions to be handled.

 drivers/usb/dwc3/gadget.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 5d084542718d..8b6a95c35741 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -2430,7 +2430,6 @@ static int dwc3_gadget_pullup(struct usb_gadget *g, int is_on)
 				msecs_to_jiffies(DWC3_PULL_UP_TIMEOUT));
 		if (ret == 0) {
 			dev_err(dwc->dev, "timed out waiting for SETUP phase\n");
-			return -ETIMEDOUT;
 		}
Since the `if' now has a single statement, you should remove the curly braces.
Thanks for the reviews!  Will fix them up and resend.

Thanks
Wesley Cheng

-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help