On Wed, Jun 30, 2021 at 07:09:20PM +0000, Marco De Marco wrote:
Support for u-blox LARA-R6 modules family, usb serial interface.
Please include the interface layout here too (cf. commit 4205cb01f6e9
("USB: serial: option: adding support for ublox R410M")) and post the
output of usb-devices (or lsusb -v) for this device.
Isn't there an ADB interface that should be reserved as well for
example?
Please also use the common "USB: serial: option:" prefix in your commit
summary (Subject).
quoted hunk ↗ jump to hunk
Signed-off-by: Marco De Marco <redacted>
---
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index aeaa3756f..05d0379c9 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -238,6 +238,7 @@ static void option_instat_callback(struct urb *urb);
#define QUECTEL_PRODUCT_UC15 0x9090
/* These u-blox products use Qualcomm's vendor ID */
#define UBLOX_PRODUCT_R410M 0x90b2
+#define UBLOX_PRODUCT_R6XX 0x90fa
Looks like the indentation for the value is off here, or in any case you
should be using tabs rather than spaces.
quoted hunk ↗ jump to hunk
/* These Yuga products use Qualcomm's vendor ID */
#define YUGA_PRODUCT_CLM920_NC5 0x9625
@@ -1101,6 +1102,8 @@ static const struct usb_device_id option_ids[] = {
/* u-blox products using Qualcomm vendor ID */
{ USB_DEVICE(QUALCOMM_VENDOR_ID, UBLOX_PRODUCT_R410M),
.driver_info = RSVD(1) | RSVD(3) },
+ { USB_DEVICE(QUALCOMM_VENDOR_ID, UBLOX_PRODUCT_R6XX),
+ .driver_info = RSVD(3) },
/* Quectel products using Quectel vendor ID */
{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EC21, 0xff, 0xff, 0xff),
.driver_info = NUMEP2 },
Johan