[PATCH 1/2] usb: typec: stusb160x: register role switch before interrupt registration
From: Amelie Delaunay <amelie.delaunay@foss.st.com>
Date: 2021-07-16 12:08:08
Also in:
lkml
Subsystem:
the rest, usb subsystem, usb typec class · Maintainers:
Linus Torvalds, Greg Kroah-Hartman, Heikki Krogerus
During interrupt registration, attach state is checked. If attached, then
the Type-C state is updated with typec_set_xxx functions and role switch is
set with usb_role_switch_set_role().
If the usb_role_switch parameter is error or null, the function simply
returns 0.
So, to update usb_role_switch role if a device is attached before the irq
is registered, usb_role_switch must be registered before irq registration.
Fixes: da0cb6310094 ("usb: typec: add support for STUSB160x Type-C controller family")
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
---
drivers/usb/typec/stusb160x.c | 11 +++++++----
1 file changed, 7 insertions(+), 4 deletions(-)
diff --git a/drivers/usb/typec/stusb160x.c b/drivers/usb/typec/stusb160x.c
index 6eaeba9b096e..3d3848e7c2c2 100644
--- a/drivers/usb/typec/stusb160x.c
+++ b/drivers/usb/typec/stusb160x.c@@ -739,10 +739,6 @@ static int stusb160x_probe(struct i2c_client *client) typec_set_pwr_opmode(chip->port, chip->pwr_opmode); if (client->irq) { - ret = stusb160x_irq_init(chip, client->irq); - if (ret) - goto port_unregister; - chip->role_sw = fwnode_usb_role_switch_get(fwnode); if (IS_ERR(chip->role_sw)) { ret = PTR_ERR(chip->role_sw);
@@ -752,6 +748,10 @@ static int stusb160x_probe(struct i2c_client *client) ret); goto port_unregister; } + + ret = stusb160x_irq_init(chip, client->irq); + if (ret) + goto role_sw_put; } else { /* * If Source or Dual power role, need to enable VDD supply
@@ -775,6 +775,9 @@ static int stusb160x_probe(struct i2c_client *client) return 0; +role_sw_put: + if (chip->role_sw) + usb_role_switch_put(chip->role_sw); port_unregister: typec_unregister_port(chip->port); all_reg_disable:
--
2.25.1