[PATCH v3 0/4] Add DT bindings and DT nodes for PCIe and PHY in SC7280

This series includes PCIe support for qualcomm sc7280
which includes PCIe controller and PHY DT bindings.
The PCIe controller and PHYs are mostly comaptible with SM8250 SoC,
hence the existing pcie drivers are modified to add the support.

Changes in v3:
	* Changed pipe clock names in dt bindings as pipe_mux and phy_pipe.
	* Moved reset and NVMe GPIO pin configs into board specific file.
	* Updated pipe clk mux commit message.
	
Changes in v2:
	* Moved pcie pin control settings into IDP file.
	* Replaced pipe_clk_src with pipe_clk_mux in pcie driver 
	* Included pipe clk mux setting change set in this series

Prasad Malisetty (4):
  dt-bindings: pci: qcom: Document PCIe bindings for SC720
  arm64: dts: qcom: sc7280: Add PCIe and PHY related nodes
  arm64: dts: qcom: sc7280: Add PCIe nodes for IDP board
  PCIe: qcom: Add support to control pipe clk mux

 .../devicetree/bindings/pci/qcom,pcie.txt          |  17 +++
 arch/arm64/boot/dts/qcom/sc7280-idp.dts            |  38 +++++++
 arch/arm64/boot/dts/qcom/sc7280.dtsi               | 125 +++++++++++++++++++++
 drivers/pci/controller/dwc/pcie-qcom.c             |  22 ++++
 4 files changed, 202 insertions(+)

-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project