Thread (6 messages) 6 messages, 1 author, 2021-06-09

[PATCH v12 5/5] arm64: dts: qcom: sc7180-trogdor: Add nodes for onboard USB hub

STALE1941d LANDED

From: Matthias Kaehlcke <mka@chromium.org>
Date: 2021-06-09 22:03:15
Also in: linux-arm-msm, linux-devicetree, lkml
Subsystem: arm/qualcomm chromebook support, arm/qualcomm mailing list, arm/qualcomm support, the rest · Maintainers: Bjorn Andersson, Konrad Dybcio, Linus Torvalds

Revision v12 of 15 in this series; landed in mainline as 1da8116eb0c5 on 2021-06-15.

Revisions (15)
  1. v6 [diff vs current]
  2. v6 [diff vs current]
  3. v8 [diff vs current]
  4. v9 [diff vs current]
  5. v10 [diff vs current]
  6. v11 [diff vs current]
  7. v12 current
  8. v13 [diff vs current]
  9. v14 [diff vs current]
  10. v15 [diff vs current]
  11. v16 [diff vs current]
  12. v17 [diff vs current]
  13. v18 [diff vs current]
  14. v19 [diff vs current]
  15. v20 [diff vs current] 
Add nodes for the onboard USB hub on trogdor devices. Remove the
'always-on' property from the hub regulator, since the regulator
is now managed by the onboard_usb_hub driver.

Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
---

Changes in v12:
- none

Changes in v11:
- rebased on qcom/arm64-for-5.14 (with the rest of the series)

Changes in v10:
- keep 'regulator-boot-on' property
- updated commit message

Changes in v9:
- none

Changes in v8:
- none

Changes in v7:
- rebased on qcom/arm64-for-5.13 (with the rest of the series)

Changes in v6:
- added 'companion-hub' entry to both USB devices
- added 'vdd-supply' also to hub@2

Changes in v5:
- patch added to the series

 .../boot/dts/qcom/sc7180-trogdor-lazor-r0.dts | 19 ++++++++-----------
 .../boot/dts/qcom/sc7180-trogdor-lazor-r1.dts | 12 +++++-------
 .../arm64/boot/dts/qcom/sc7180-trogdor-r1.dts | 19 ++++++++-----------
 arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi  | 19 ++++++++++++++++++-
 4 files changed, 39 insertions(+), 30 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r0.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r0.dts
index 30e3e769d2b4..5fb8e12af1a0 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r0.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r0.dts
@@ -14,17 +14,6 @@ / {
 	compatible = "google,lazor-rev0", "qcom,sc7180";
 };
 
-&pp3300_hub {
-	/* pp3300_l7c is used to power the USB hub */
-	/delete-property/regulator-always-on;
-	/delete-property/regulator-boot-on;
-};
-
-&pp3300_l7c {
-	regulator-always-on;
-	regulator-boot-on;
-};
-
 &sn65dsi86_out {
 	/*
 	 * Lane 0 was incorrectly mapped on the cable, but we've now decided
@@ -33,3 +22,11 @@ &sn65dsi86_out {
 	 */
 	lane-polarities = <1 0>;
 };
+
+&usb_hub_2_0 {
+	 vdd-supply = <&pp3300_l7c>;
+};
+
+&usb_hub_3_0 {
+	 vdd-supply = <&pp3300_l7c>;
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1.dts
index c2ef06367baf..1dae714250f5 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1.dts
@@ -14,13 +14,11 @@ / {
 	compatible = "google,lazor-rev1", "google,lazor-rev2", "qcom,sc7180";
 };
 
-&pp3300_hub {
-	/* pp3300_l7c is used to power the USB hub */
-	/delete-property/regulator-always-on;
-	/delete-property/regulator-boot-on;
+
+&usb_hub_2_0 {
+	 vdd-supply = <&pp3300_l7c>;
 };
 
-&pp3300_l7c {
-	regulator-always-on;
-	regulator-boot-on;
+&usb_hub_3_0 {
+	 vdd-supply = <&pp3300_l7c>;
 };
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts
index 2b522f9e0d8f..2f5263e3d1b9 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts
@@ -42,17 +42,6 @@ &panel {
 	compatible = "auo,b116xa01";
 };
 
-&pp3300_hub {
-	/* pp3300_l7c is used to power the USB hub */
-	/delete-property/regulator-always-on;
-	/delete-property/regulator-boot-on;
-};
-
-&pp3300_l7c {
-	regulator-always-on;
-	regulator-boot-on;
-};
-
 &sdhc_2 {
 	status = "okay";
 };
@@ -61,6 +50,14 @@ &trackpad {
 	interrupts = <58 IRQ_TYPE_EDGE_FALLING>;
 };
 
+&usb_hub_2_0 {
+	 vdd-supply = <&pp3300_l7c>;
+};
+
+&usb_hub_3_0 {
+	 vdd-supply = <&pp3300_l7c>;
+};
+
 /* PINCTRL - modifications to sc7180-trogdor.dtsi */
 
 &trackpad_int_1v8_odl {
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
index a4cbdc36c306..3345ca650a4c 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
@@ -202,7 +202,6 @@ pp3300_hub: pp3300-hub {
 		pinctrl-names = "default";
 		pinctrl-0 = <&en_pp3300_hub>;
 
-		regulator-always-on;
 		regulator-boot-on;
 
 		vin-supply = <&pp3300_a>;
@@ -903,6 +902,24 @@ &usb_1 {
 
 &usb_1_dwc3 {
 	dr_mode = "host";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	/* 2.0 hub on port 1 */
+	usb_hub_2_0: hub@1 {
+		compatible = "usbbda,5411";
+		reg = <1>;
+		vdd-supply = <&pp3300_hub>;
+		companion-hub = <&usb_hub_3_0>;
+	};
+
+	/* 3.0 hub on port 2 */
+	usb_hub_3_0: hub@2 {
+		compatible = "usbbda,411";
+		reg = <2>;
+		vdd-supply = <&pp3300_hub>;
+		companion-hub = <&usb_hub_2_0>;
+	};
 };
 
 &usb_1_hsphy {
-- 
2.32.0.rc1.229.g3e70b5a671-goog
Other recent patches touching these files
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help