ZLP gets stuck if TDL_CHK bit is set and TDL_FROM_TRB is used
as TDL source for IN endpoints. To fix it, TDL_CHK is only
enabled for OUT endpoints.

Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver")
Reported-by: Aswath Govindraju <redacted>
Signed-off-by: Sanket Parmar <redacted>
---
 drivers/usb/cdns3/cdns3-gadget.c |    8 +++-----
 1 files changed, 3 insertions(+), 5 deletions(-)

diff --git a/drivers/usb/cdns3/cdns3-gadget.c b/drivers/usb/cdns3/cdns3-gadget.c
index 105855a..f3c0276 100644
--- a/drivers/usb/cdns3/cdns3-gadget.c
+++ b/drivers/usb/cdns3/cdns3-gadget.c

@@ -2007,7 +2007,7 @@ static void cdns3_configure_dmult(struct cdns3_device *priv_dev,
 		else
 			mask = BIT(priv_ep->num);
 
-		if (priv_ep->type != USB_ENDPOINT_XFER_ISOC) {
+		if (priv_ep->type != USB_ENDPOINT_XFER_ISOC  && !priv_ep->dir) {
 			cdns3_set_register_bit(&regs->tdl_from_trb, mask);
 			cdns3_set_register_bit(&regs->tdl_beh, mask);
 			cdns3_set_register_bit(&regs->tdl_beh2, mask);

@@ -2046,15 +2046,13 @@ int cdns3_ep_config(struct cdns3_endpoint *priv_ep, bool enable)
 	case USB_ENDPOINT_XFER_INT:
 		ep_cfg = EP_CFG_EPTYPE(USB_ENDPOINT_XFER_INT);
 
-		if ((priv_dev->dev_ver == DEV_VER_V2 && !priv_ep->dir) ||
-		    priv_dev->dev_ver > DEV_VER_V2)
+		if (priv_dev->dev_ver >= DEV_VER_V2 && !priv_ep->dir)
 			ep_cfg |= EP_CFG_TDL_CHK;
 		break;
 	case USB_ENDPOINT_XFER_BULK:
 		ep_cfg = EP_CFG_EPTYPE(USB_ENDPOINT_XFER_BULK);
 
-		if ((priv_dev->dev_ver == DEV_VER_V2  && !priv_ep->dir) ||
-		    priv_dev->dev_ver > DEV_VER_V2)
+		if (priv_dev->dev_ver >= DEV_VER_V2 && !priv_ep->dir)
 			ep_cfg |= EP_CFG_TDL_CHK;
 		break;
 	default:

--