Hi Peter,

On 21-03-22 07:09:02, Pawel Laszczak wrote:

quoted

From: Pawel Laszczak <pawell@cadence.com>

Patch adds flag EP_UNCONFIGURED to detect whether endpoint was
unconfigured. This flag is set in cdnsp_reset_device after Reset Device
command. Among others this command disables all non control endpoints.
Flag is used in cdnsp_gadget_ep_disable to protect controller against
invoking Configure Endpoint command on disabled endpoint. Lack of this
protection in some cases caused that Configure Endpoint command completed
with Context State Error code completion.

Fixes: 3d82904559f4 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver")
Signed-off-by: Pawel Laszczak <pawell@cadence.com>
---
 drivers/usb/cdns3/cdnsp-gadget.c | 18 +++++++++++++-----
 drivers/usb/cdns3/cdnsp-gadget.h | 11 ++++++-----
 2 files changed, 19 insertions(+), 10 deletions(-)

diff --git a/drivers/usb/cdns3/cdnsp-gadget.c b/drivers/usb/cdns3/cdnsp-gadget.c
index d7d4bdd57f46..de17cc4ad91a 100644
--- a/drivers/usb/cdns3/cdnsp-gadget.c
+++ b/drivers/usb/cdns3/cdnsp-gadget.c

@@ -727,7 +727,7 @@ int cdnsp_reset_device(struct cdnsp_device *pdev)
 	 * are in Disabled state.
 	 */
 	for (i = 1; i < CDNSP_ENDPOINTS_NUM; ++i)
-		pdev->eps[i].ep_state |= EP_STOPPED;
+		pdev->eps[i].ep_state |= EP_STOPPED | EP_UNCONFIGURED;

 	trace_cdnsp_handle_cmd_reset_dev(slot_ctx);

@@ -942,6 +942,7 @@ static int cdnsp_gadget_ep_enable(struct usb_ep *ep,

 	pep = to_cdnsp_ep(ep);
 	pdev = pep->pdev;
+	pep->ep_state &= ~EP_UNCONFIGURED;

 	if (dev_WARN_ONCE(pdev->dev, pep->ep_state & EP_ENABLED,
 			  "%s is already enabled\n", pep->name))

@@ -1023,9 +1024,13 @@ static int cdnsp_gadget_ep_disable(struct usb_ep *ep)
 		goto finish;
 	}

-	cdnsp_cmd_stop_ep(pdev, pep);
 	pep->ep_state |= EP_DIS_IN_RROGRESS;
-	cdnsp_cmd_flush_ep(pdev, pep);
+
+	/* Endpoint was unconfigured by Reset Device command. */
+	if (!(pep->ep_state & EP_UNCONFIGURED)) {
+		cdnsp_cmd_stop_ep(pdev, pep);
+		cdnsp_cmd_flush_ep(pdev, pep);
+	}

 	/* Remove all queued USB requests. */
 	while (!list_empty(&pep->pending_list)) {

@@ -1036,6 +1041,7 @@ static int cdnsp_gadget_ep_disable(struct usb_ep *ep)
 	cdnsp_invalidate_ep_events(pdev, pep);

 	pep->ep_state &= ~EP_DIS_IN_RROGRESS;
+

Useless blank line

quoted

 	drop_flag = cdnsp_get_endpoint_flag(pep->endpoint.desc);
 	ctrl_ctx = cdnsp_get_input_control_ctx(&pdev->in_ctx);
 	ctrl_ctx->drop_flags = cpu_to_le32(drop_flag);

@@ -1043,10 +1049,12 @@ static int cdnsp_gadget_ep_disable(struct usb_ep *ep)

 	cdnsp_endpoint_zero(pdev, pep);

-	ret = cdnsp_update_eps_configuration(pdev, pep);
+	if (!(pep->ep_state & EP_UNCONFIGURED))
+		ret = cdnsp_update_eps_configuration(pdev, pep);
+
 	cdnsp_free_endpoint_rings(pdev, pep);

-	pep->ep_state &= ~EP_ENABLED;
+	pep->ep_state &= ~(EP_ENABLED | EP_UNCONFIGURED);
 	pep->ep_state |= EP_STOPPED;

 finish:

diff --git a/drivers/usb/cdns3/cdnsp-gadget.h b/drivers/usb/cdns3/cdnsp-gadget.h
index 6bbb26548c04..e628bd539e23 100644
--- a/drivers/usb/cdns3/cdnsp-gadget.h
+++ b/drivers/usb/cdns3/cdnsp-gadget.h

@@ -830,11 +830,12 @@ struct cdnsp_ep {
 	unsigned int ep_state;
 #define EP_ENABLED		BIT(0)
 #define EP_DIS_IN_RROGRESS	BIT(1)
-#define EP_HALTED		BIT(2)
-#define EP_STOPPED		BIT(3)
-#define EP_WEDGE		BIT(4)
-#define EP0_HALTED_STATUS	BIT(5)
-#define EP_HAS_STREAMS		BIT(6)
+#define EP_UNCONFIGURED		BIT(2)

Why add new flag as BIT(2), it causes many changes in this patch?

In my feeling, EP_UNCONFIGURED is more associates with the first 2 flags, so I've decided 
put it after BIT(1).  

quoted

+#define EP_HALTED		BIT(3)
+#define EP_STOPPED		BIT(4)
+#define EP_WEDGE		BIT(5)
+#define EP0_HALTED_STATUS	BIT(6)
+#define EP_HAS_STREAMS		BIT(7)

 	bool skip;
 };
--
2.25.1

--

Thanks,
Peter Chen