Re: [xhci] usb 4-1: reset SuperSpeed Gen 1 USB device number 2 using xhci_hcd

From
Sedat Dilek <hidden>
Date
2021-02-24 17:27:08
Also in
lkml
On Wed, Feb 24, 2021 at 2:44 PM Sedat Dilek [off-list ref] wrote:
Hi Mathias,

I am here on Linux-v5.11-10201-gc03c21ba6f4e.

I see a lot xhci-resets in my dmesg-log:

root# LC_ALL=C dmesg -T | grep 'usb 4-1: reset SuperSpeed Gen 1 USB
device number 2 using xhci_hcd' | wc -l
75

This is what I have:

root# lsusb -s 004:001
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub

root# lsusb -s 004:002
Bus 004 Device 002: ID 174c:55aa ASMedia Technology Inc. ASM1051E SATA
6Gb/s bridge, ASM1053E SATA 6Gb/s bridge, ASM1153 SATA 3Gb/s bridge,
ASM1153E SATA 6Gb/s bridge

My external USB 3.0 HDD contains the partition with my Debian-system
and is attached to the above xhci bus/device.

Can you enlighten what this means?
Is this a known issue?
Is there a fix around?

BTW, in which Git tree is the xhci development happening?
Can you point me to it?

I am attaching my linux-config and full dmesg-log.

Also I have attached outputs of:

$ sudo lsusb -vvv -d 1d6b:0003
$ sudo lsusb -vvv -d 174c:55aa

If you need further information, please let me know.

Thanks.
Looks like that xhci-reset happens here every 10min.

- Sedat -
Thread (16 messages) 16 messages, 2 authors, last reply 2021-03-06
Keyboard shortcuts
hback out one level
jnext message in thread / next series-diff position
kprevious message in thread / previous series-diff position
ldrill in
Escclose help / fold thread tree
?toggle this help