[PATCH v2 1/2] dt-bindings: usb: generic-ehci: document ignore-oc flag
From: Álvaro Fernández Rojas <hidden>
Date: 2021-02-23 16:17:55
Also in:
linux-arm-kernel, linux-devicetree, lkml
Subsystem:
open firmware and flattened device tree bindings, the rest, usb subsystem · Maintainers:
Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds, Greg Kroah-Hartman
Over-current reporting isn't supported on some platforms such as bcm63xx. These devices will incorrectly report over-current if this flag isn't properly activated. Signed-off-by: Álvaro Fernández Rojas <redacted> --- v2: change flag name and improve documentation as suggested by Alan Stern. Documentation/devicetree/bindings/usb/generic-ehci.yaml | 6 ++++++ 1 file changed, 6 insertions(+)
diff --git a/Documentation/devicetree/bindings/usb/generic-ehci.yaml b/Documentation/devicetree/bindings/usb/generic-ehci.yaml
index cf83f2d9afac..8089dc956ba3 100644
--- a/Documentation/devicetree/bindings/usb/generic-ehci.yaml
+++ b/Documentation/devicetree/bindings/usb/generic-ehci.yaml@@ -122,6 +122,12 @@ properties: description: Set this flag to force EHCI reset after resume. + spurious-oc: + $ref: /schemas/types.yaml#/definitions/flag + description: + Set this flag to indicate that the hardware sometimes turns on + the OC bit when an over-current isn't actually present. + companion: $ref: /schemas/types.yaml#/definitions/phandle description:
--
2.20.1