Done. Just sent out the following patch and CCed stable@vger.kernel.org as well.

[PATCH v2] usb: typec: tcpm: Wait for vbus discharge to VSAFE0V before toggling

Thanks,
Badhri


On Thu, Feb 18, 2021 at 2:42 AM Greg Kroah-Hartman
[off-list ref] wrote:

On Thu, Feb 18, 2021 at 02:38:45AM -0800, Badhri Jagan Sridharan wrote:

quoted

Hi Greg,

This patch is a bug fix for the following patch which was introduced in 5.11.

commit f321a02caebdd0c56e167610cda2fa148cd96e8b
Author: Badhri Jagan Sridharan [off-list ref]
Date:   Wed Oct 28 23:31:35 2020 -0700

    usb: typec: tcpm: Implement enabling Auto Discharge disconnect support

    TCPCI spec allows TCPC hardware to autonomously discharge the vbus
    capacitance upon disconnect. The expectation is that the TCPM enables
    AutoDischargeDisconnect while entering SNK/SRC_ATTACHED states. Hardware
    then automously discharges vbus when the vbus falls below a certain
    threshold i.e. VBUS_SINK_DISCONNECT_THRESHOLD.

    Apart from enabling the vbus discharge circuit, AutoDischargeDisconnect
    is also used a flag to move TCPCI based TCPC implementations into
    Attached.Snk/Attached.Src state as mentioned in
    Figure 4-15. TCPC State Diagram before a Connection of the
    USB Type-C Port Controller Interface Specification.
    In such TCPC implementations, setting AutoDischargeDisconnect would
    prevent TCPC into entering "Connection_Invalid" state as well.

    Signed-off-by: Badhri Jagan Sridharan [off-list ref]
    Reviewed-by: Heikki Krogerus [off-list ref]
    Link: https://lore.kernel.org/r/20201029063138.1429760-8-badhri@google.com (local)
    Signed-off-by: Greg Kroah-Hartman [off-list ref]

Great, then can you resend the patch and add a proper Fixes: tag, along
with a cc: stable as well?

thanks,

greg k-h