From: Pali Rohár, Sent: Tuesday, February 2, 2021 12:12 AM
On Tuesday 26 January 2021 10:06:06 Pali Rohár wrote:

quoted

On Tuesday 26 January 2021 04:27:37 Yoshihiro Shimoda wrote:

quoted

Hi Pali,

quoted

quoted

I can see the benefit in this.
In the xhci-plat case usb_create_hcd and usb_add_hcd are separate steps, and
we could both copy the xhci_plat_priv .quirks and run the .init_qurks before
adding the hcd.
I guess the current way is inherited from pci case where the earliest place
to do this after hcd is created is the hcd->driver->reset callback (which is
set to xhci_pci_setup() or xhci_plat_setup()).

xhci-rcar.c is using the .init_quirk to load firmware, we need to check with
them if this change is ok. (added Yoshihiro Shimoda to cc)

Yoshihiro, is this change OK?

Can we move forward? I really need to now how to handle regression in
xhci-mvebu driver. And one option is with this patch...

Thank you for asking me about this topic. I tested the patch, but unfortunately,
this patch is possible to break a rcar platform because a phy initialization is
needed before the firmware loading if the platform uses the phy. (Note that
upstream code (salvator-common.dtsi) doesn't use the phy for xhci. But,
if we use the phy on other board with this patch, the xhci will not work.)

So, I think we need to add a new function pointer for your case.

Ok, thank you for testing! I will try to come up with other solution to
mentioned mvebu-xhci issue.

Hello! New version of this patch is in following thread, please review it:
"[PATCH v2] usb: host: xhci: mvebu: make USB 3.0 PHY optional for Armada 3720"

Thanks! I'll review it.

Best regards,
Yoshihiro Shimoda