This commit enables the use of the r8153_ecm driver, introduced with
commit c1aedf015ebdd0 ("net/usb/r8153_ecm: support ECM mode for
RTL8153") for the Lenovo Powered USB-C Hub (17ef:721e) based on the
Realtek RTL8153B chip.

This results in the following driver preference:

- if r8152 is available, use the r8152 driver
- if r8152 is not available, use the r8153_ecm driver

This is done to prevent the NIC from constantly sending pause frames
when the host system enters standby (fixed by using the r8152 driver
in "r8152: Add Lenovo Powered USB-C Travel Hub"), while still allowing
the device to work with the r8153_ecm driver as a fallback.

Signed-off-by: Leon Schuermann <redacted>
Tested-by: Leon Schuermann <redacted>
---
 drivers/net/usb/r8153_ecm.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/net/usb/r8153_ecm.c b/drivers/net/usb/r8153_ecm.c
index 2c3fabd38b16..20b2df8d74ae 100644
--- a/drivers/net/usb/r8153_ecm.c
+++ b/drivers/net/usb/r8153_ecm.c

@@ -122,12 +122,20 @@ static const struct driver_info r8153_info = {
 };
 
 static const struct usb_device_id products[] = {
+/* Realtek RTL8153 Based USB 3.0 Ethernet Adapters */
 {
 	USB_DEVICE_AND_INTERFACE_INFO(VENDOR_ID_REALTEK, 0x8153, USB_CLASS_COMM,
 				      USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
 	.driver_info = (unsigned long)&r8153_info,
 },
 
+/* Lenovo Powered USB-C Travel Hub (4X90S92381, based on Realtek RTL8153) */
+{
+	USB_DEVICE_AND_INTERFACE_INFO(VENDOR_ID_LENOVO, 0x721e, USB_CLASS_COMM,
+				      USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
+	.driver_info = (unsigned long)&r8153_info,
+},
+
 	{ },		/* END */
 };
 MODULE_DEVICE_TABLE(usb, products);

-- 
2.29.2