On Mon, 11 Jan 2021 16:13:36 +0100, Sascha Hauer wrote:

This adds support for an additional clock for the dwc2 core in case
there is another clock to the phy which must be enabled.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 Documentation/devicetree/bindings/usb/dwc2.yaml | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/usb/amlogic,meson-g12a-usb-ctrl.example.dt.yaml: usb@ff400000: clocks: [[4294967295]] is too short
	From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/usb/dwc2.yaml
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/usb/amlogic,meson-g12a-usb-ctrl.example.dt.yaml: usb@ff400000: clock-names: ['otg'] is too short
	From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/usb/dwc2.yaml
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/usb/dwc2.example.dt.yaml: usb@101c0000: clocks: [[4294967295]] is too short
	From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/usb/dwc2.yaml
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/usb/dwc2.example.dt.yaml: usb@101c0000: clock-names: ['otg'] is too short
	From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/usb/dwc2.yaml

See https://patchwork.ozlabs.org/patch/1424674

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.