Re: [PATCH] USB: otg: Fix error 32 when enable hardware flow control.
From: "gregkh@linuxfoundation.org" <gregkh@linuxfoundation.org>
Date: 2021-01-11 07:14:19
Also in:
lkml
On Mon, Jan 11, 2021 at 04:55:22AM +0000, Pho Tran wrote:
When hardware flow control is enabled, don't allow host send MHS command to cp210x. Signed-off-by: Pho Tran<redacted>
Nit, you need a ' ' before the '<' character. And why didn't you send this to the maintainer of this file as described by scripts/get_maintainer.pl? Please do so when you fix things up and send the next version.
quoted hunk ↗ jump to hunk
--- drivers/usb/serial/cp210x.c | 32 +++++++++++++++++++++++++++++++- 1 file changed, 31 insertions(+), 1 deletion(-)diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c index fbb10dfc56e3..f231cecdaf7d 100644 --- a/drivers/usb/serial/cp210x.c +++ b/drivers/usb/serial/cp210x.c@@ -1204,6 +1204,7 @@ static int cp210x_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear) { struct usb_serial_port *port = tty->driver_data; + return cp210x_tiocmset_port(port, set, clear); }
Unneeded change :(
quoted hunk ↗ jump to hunk
@@ -1211,6 +1212,11 @@ static int cp210x_tiocmset_port(struct usb_serial_port *port, unsigned int set, unsigned int clear) { u16 control = 0; + struct cp210x_flow_ctl flow_ctl; + u32 ctl_hs = 0; + u32 flow_repl = 0; + bool auto_dtr = false; + bool auto_rts = false; if (set & TIOCM_RTS) { control |= CONTROL_RTS;@@ -1230,6 +1236,30 @@ static int cp210x_tiocmset_port(struct usb_serial_port *port, } dev_dbg(&port->dev, "%s - control = 0x%.4x\n", __func__, control); + /* + * Don't send MHS command if device in hardware flowcontrol mode + */
Why the giant comment?
+ cp210x_read_reg_block(port, CP210X_GET_FLOW, &flow_ctl, + sizeof(flow_ctl)); + ctl_hs = le32_to_cpu(flow_ctl.ulControlHandshake); + flow_repl = le32_to_cpu(flow_ctl.ulFlowReplace); + + if (CP210X_SERIAL_DTR_SHIFT(CP210X_SERIAL_DTR_FLOW_CTL) + == (ctl_hs & CP210X_SERIAL_DTR_MASK))
Very odd indentation :(
quoted hunk ↗ jump to hunk
+ auto_dtr = true; + else + auto_dtr = false; + + if (CP210X_SERIAL_RTS_SHIFT(CP210X_SERIAL_RTS_FLOW_CTL) + == (flow_repl & CP210X_SERIAL_RTS_MASK)) + auto_rts = true; + else + auto_rts = false; + + if (auto_dtr || auto_rts) { + dev_dbg(&port->dev, "Don't set MHS when while device in flow control mode\n"); + return 0; + } return cp210x_write_u16_reg(port, CP210X_SET_MHS, control); }@@ -1256,7 +1286,7 @@ static int cp210x_tiocmget(struct tty_struct *tty) |((control & CONTROL_RTS) ? TIOCM_RTS : 0) |((control & CONTROL_CTS) ? TIOCM_CTS : 0) |((control & CONTROL_DSR) ? TIOCM_DSR : 0) - |((control & CONTROL_RING)? TIOCM_RI : 0) + |((control & CONTROL_RING) ? TIOCM_RI : 0)
Do not mix whitespace changes with logic changes in the same patch, that is a sure way to get your patch rejected. thanks, greg k-h