On Mon, Jan 04, 2021 at 11:29:39PM +0900, Daniel Palmer wrote:

Hi Johan,

On Mon, 4 Jan 2021 at 19:32, Johan Hovold [off-list ref] wrote:

quoted

Also, would you mind posting the "lsusb -v" output for this device for
reference?

The lsusb from busybox on this system doesn't support the -v option it seems.
Here is the output from /sys/kernel/debug/usb/devices:

T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=2df3 ProdID=9d03 Rev= 1.00
S:  Manufacturer=Marvell
S:  Product=Mobile Composite Device Bus
S:  SerialNumber=<snip>
C:* #Ifs= 5 Cfg#= 1 Atr=c0 MxPwr=500mA
A:  FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=03
I:* If#= 0 Alt= 0 #EPs= 1 Cls=e0(wlcon) Sub=01 Prot=03 Driver=rndis_host
E:  Ad=87(I) Atr=03(Int.) MxPS=  64 Ivl=4096ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=0c(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=0b(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=89(I) Atr=03(Int.) MxPS=  64 Ivl=4096ms
E:  Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=0f(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=88(I) Atr=03(Int.) MxPS=  64 Ivl=4096ms
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=0a(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms

I can rebuild my rootfs with the usbutils lsusb tomorrow when I have
physical access to it again if needed.

That's ok, the above will do just fine.

It looks like we must not try to bind to the first two interfaces
however:

	{ USB_DEVICE_INTERFACE_CLASS(0x2df3, 0x9d03, 0xff) },			/* LongSung M5710 */

quoted

Do you know what each interface is used for?

The second tty responds to AT commands. The others don't do anything so far.
The hardware documentation doesn't say much aside that there is a usb interface.

Ok, thanks. I'll apply this one with the above change now.

Johan