On Wed, Nov 4, 2020 at 4:00 PM Mika Westerberg
[off-list ref] wrote:
Hi all,
This series adds a new Thunderbolt service driver that can be used on
manufacturing floor to test that each Thunderbolt/USB4 port is functional.
It can be done either using a special loopback dongle that has RX and TX
lanes crossed, or by connecting a cable back to the host (for those who
don't have these dongles).
This takes advantage of the existing XDomain protocol and creates XDomain
devices for the loops back to the host where the DMA traffic test driver
can bind to.
The DMA traffic test driver creates a tunnel through the fabric and then
sends and receives data frames over the tunnel checking for different
errors.
For the whole series,
Acked-by: Yehezkel Bernat <YehezkelShB@gmail.com>