[1/9] dt-bindings: usb: hd3ss3220 device tree binding document
flat view
STALE2753d
From: Biju Das <hidden>
Date: 2019-03-06 09:07:18
Also in:
linux-devicetree, linux-renesas-soc
Subsystem:
open firmware and flattened device tree bindings, the rest, usb subsystem · Maintainers:
Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds, Greg Kroah-Hartman
Revision v1 of 6 in this series.
Revisions (6)
Add device tree binding document for TI HD3SS3220 Type-C DRP port controller driver. Signed-off-by: Biju Das <redacted> --- Documentation/devicetree/bindings/usb/ti,hd3ss3220.txt | 15 +++++++++++++++ 1 file changed, 15 insertions(+) create mode 100644 Documentation/devicetree/bindings/usb/ti,hd3ss3220.txt
diff --git a/Documentation/devicetree/bindings/usb/ti,hd3ss3220.txt b/Documentation/devicetree/bindings/usb/ti,hd3ss3220.txt
new file mode 100644
index 0000000..1fcf6f6
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/ti,hd3ss3220.txt@@ -0,0 +1,15 @@ +TI HD3SS3220 TypeC DRP Port Controller. + +Required properties: + - compatible: Must be "ti,hd3ss3220". + - reg: I2C slave address, must be 0x47 or 0x67 based on ADDR pin. + - interrupts: <a b> where a is the interrupt number and b represents an + encoding of the sense and level information for the interrupt. + +Example: +hd3ss3220@47 { + compatible = "ti,hd3ss3220"; + reg = <0x47>; + interrupt-parent = <&gpio6>; + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; +};