[v4,2/8] usb: dwc3: update stream id in depcmd

For stream capable endpoints, stream id related information
needs to be updated into DEPCMD while issuing START TRANSFER.
This patch does the same.

Signed-off-by: Anurag Kumar Vulisha <redacted>
Reviewed-by: Thinh Nguyen <redacted>
---
 Changes in v4:
	1. None

 Changes in v3:
	1. None

 Changes in v2:
	1. None
---
 drivers/usb/dwc3/gadget.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 8a1622b..43d63a8 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c

@@ -1224,6 +1224,9 @@ static int __dwc3_gadget_kick_transfer(struct dwc3_ep *dep)
 		params.param1 = lower_32_bits(req->trb_dma);
 		cmd = DWC3_DEPCMD_STARTTRANSFER;
 
+		if (dep->stream_capable)
+			cmd |= DWC3_DEPCMD_PARAM(req->request.stream_id);
+
 		if (usb_endpoint_xfer_isoc(dep->endpoint.desc))
 			cmd |= DWC3_DEPCMD_PARAM(dep->frame_number);
 	} else {