| Friday 31 August |
|
[v4,2/2] usb: typec: ucsi: add support for Cypress CCGx
Ajay Gupta
|
none |
|
[v5,2/2] usb: typec: ucsi: add support for Cypress CCGx
Ajay Gupta
|
none |
|
[v5,1/2] i2c: buses: add i2c bus driver for NVIDIA GPU
Ajay Gupta
|
none |
|
[v4,1/2] i2c: buses: add i2c bus driver for NVIDIA GPU
Ajay Gupta
|
none |
|
[v4,1/2] i2c: buses: add i2c bus driver for NVIDIA GPU
Ajay Gupta
|
none |
|
[PATCH] usb: Avoid use-after-free by flushing endpoints early in usb_set_interface()
Mathias Nyman
|
1 |
|
[PATCH 2/2] xhci: Fix use after free for URB cancellation on a reallocated endpoint
Mathias Nyman
REVIEWED: 1 review, 1 by a maintainer
|
none |
|
usb: core: added uevent for over-current
Jon Flatley
|
none |
|
[1/2] usb: host: xhci-plat: Iterate over parent nodes for finding quirks
Mathias Nyman
|
none |
|
[8/8] plarform: x86: intel_cht_int33fe: Remove the old connections for the muxes
Heikki Krogerus
|
none |
|
[7/8] usb: typec: class: Don't use port parent for getting mux handles
Heikki Krogerus
|
none |
|
[6/8] plarform: x86: intel_cht_int33fe: Add connections for the USB Type-C port
Heikki Krogerus
|
none |
|
[5/8] plarform: x86: intel_cht_int33fe: Fix the identifier for the mux connection
Heikki Krogerus
|
none |
|
[4/8] usb: xhci: pci: Only create Intel mux device when it's needed
Heikki Krogerus
|
none |
|
[3/8] plarform: x86: intel_cht_int33fe: Use the USB role switch conditionally
Heikki Krogerus
|
none |
|
[2/8] plarform: x86: intel_cht_int33fe: Register all connections at once
Heikki Krogerus
|
none |
|
[1/8] drivers: base: Helpers for adding device connection descriptions
Heikki Krogerus
|
none |
|
[PATCH 6/6] usb: gadget: udc: renesas_usb3: Add r8a774a1 support
Fabrizio Castro
REVIEWED: 1 review, 0 by maintainers
|
2 |
|
[PATCH 5/6] dt-bindings: usb: renesas_usbhs: Add r8a774a1 support
Fabrizio Castro
REVIEWED: 1 review, 0 by maintainers
|
2 |
|
[PATCH 3/6] dt-bindings: usb-xhci: Add r8a774a1 support
Fabrizio Castro
REVIEWED: 1 review, 0 by maintainers
|
2 |
|
[PATCH 2/3] dt-bindings: usb: fusb302: Use usb-connector bindings for configuration
Adam Thomson
|
1 |
|
[PATCH 1/3] dt-bindings: connector: Add support for USB-PD PPS APDOs to bindings
Adam Thomson
|
1 |
|
[PATCH v2 3/3] usb: renesas_usbhs: Add multiple clocks management
Yoshihiro Shimoda
SUPERSEDED
|
none |
|
[PATCH v2 2/3] dt-bindings: usb: renesas_usbhs: add clock-names property
Yoshihiro Shimoda
SUPERSEDED
|
none |
|
[PATCH v2 1/3] usb: renesas_usbhs: Add reset_control
Yoshihiro Shimoda
SUPERSEDED
|
none |
|
[PATCH V2 3/4] serial: f81232: implement break control
Ji-Ze Hong (Peter Hong)
|
2 |
|
[PATCH] usb: core: phy: clean up return value check about devm_of_phy_get_by_index()
Chunfeng Yun
|
1 |
|
[PATCH v3] usb: core: phy: fix return value checking about devm_of_phy_get_by_index()
Chunfeng Yun
|
2 |
|
[PATCH v5] usb: core: phy: clean up return value check about devm_of_phy_get_by_index()
Chunfeng Yun
REVIEWED: 1 review, 1 by a maintainer
|
none |
|
[3/3] usb: renesas_usbhs: Add multiple clocks management
Yoshihiro Shimoda
|
none |
|
[PATCH 3/3] usb: renesas_usbhs: Add multiple clocks management
Yoshihiro Shimoda
SUPERSEDED
|
1 |
|
[RFC 2/3] USB: core: Add non-coherent buffer allocation helpers
Ezequiel Garcia
|
4 |
|
[v4,2/2] usb: typec: ucsi: add support for Cypress CCGx
Andy Shevchenko
|
none |
|
[PATCH 2/3] dt-bindings: usb: renesas_usbhs: add clock-names property
Yoshihiro Shimoda
SUPERSEDED
|
none |
|
[PATCH 1/3] usb: renesas_usbhs: Add reset_control
Yoshihiro Shimoda
SUPERSEDED
|
none |
|
[v4,1/2] i2c: buses: add i2c bus driver for NVIDIA GPU
Andy Shevchenko
|
none |
|
[2/3] usb: renesas_usbhs: enable DVSE interrupt
Yoshihiro Shimoda
REVIEWED: 1 review, 1 by a maintainer
|
none |
|
[3/3] usb: renesas_usbhs: add suspend event support in gadget mode
Yoshihiro Shimoda
|
none |
| Thursday 30 August |
|
[v4,2/2] usb: typec: ucsi: add support for Cypress CCGx
Ajay Gupta
|
none |
|
[v4,1/2] i2c: buses: add i2c bus driver for NVIDIA GPU
Ajay Gupta
|
none |
|
[v3,1/2] i2c: buses: add i2c bus driver for NVIDIA GPU
Wolfram Sang
|
none |
|
[v3,2/2] usb: typec: ucsi: add support for Cypress CCGx
Ajay Gupta
|
none |
|
[v3,1/2] i2c: buses: add i2c bus driver for NVIDIA GPU
Ajay Gupta
|
none |
|
[RFC 3/3] stk1160: Use non-coherent buffers for USB transfers
Ezequiel Garcia
|
1 |
|
[RFC 1/3] HACK: ARM: dma-mapping: Get writeback memory for non-consistent mappings
Ezequiel Garcia
|
none |
|
[3/3] usb: renesas_usbhs: add suspend event support in gadget mode
Eugeniu Rosca
|
none |
|
[2/3] usb: renesas_usbhs: enable DVSE interrupt
Eugeniu Rosca
|
none |
|
[1/3] usb: renesas_usbhs: simplify usbhs_status_get_device_state()
Eugeniu Rosca
|
none |
|
[v1] USB: wusbcore: Switch to bitmap_zalloc()
Andy Shevchenko
|
none |
|
[PATCH 1/2] usb: gadget: fsl_udc_core: check allocation return value and cleanup on failure
Nicholas Mc Guire
|
1 |
|
[PATCH] usb: misc: fix obsolete function
Ding Xiang
|
none |
|
Revert "cdc-acm: implement put_char() and flush_chars()"
Oliver Neukum
|
none |
|
[PATCH] usb: gadget: atmel: remove pointless retrieval of DT name property
Rob Herring
|
1 |
|
[PATCH 4/5] memstick: rtsx_usb_ms: Support runtime power management
Kai-Heng Feng
SUPERSEDED
|
7 |
|
[v3,2/2] usb: typec: ucsi: add support for Cypress CCGx
Andy Shevchenko
|
none |
|
[v3,1/2] i2c: buses: add i2c bus driver for NVIDIA GPU
Andy Shevchenko
REVIEWED: 1 review, 0 by maintainers
|
none |
|
[PATCH V2 4/4] USB: serial: f81232: fix bulk_in/out size
Ji-Ze Hong (Peter Hong)
|
none |
|
[PATCH V2 3/4] USB: serial: f81232: implement break control
Ji-Ze Hong (Peter Hong)
|
none |
|
[PATCH V2 2/4] USB: serial: f81232: add high baud rate support
Ji-Ze Hong (Peter Hong)
|
none |
|
[PATCH V2 1/4] USB: serial: f81232: clear overrun flag
Ji-Ze Hong (Peter Hong)
|
none |
|
[PATCH v2] usb: core: phy: fix return value checking about devm_of_phy_get_by_index()
Chunfeng Yun
|
2 |
|
[PATCH 1/6] usb: xhci-mtk: resume USB3 roothub first
Chunfeng Yun
|
7 |
|
[v3,2/2] usb: typec: ucsi: add support for Cypress CCGx
Ajay Gupta
|
none |
|
[v3,1/2] i2c: buses: add i2c bus driver for NVIDIA GPU
Ajay Gupta
|
none |